Viewing all customer Discussions for:

Other

Windows are alenco. Thanks for your help.

This latch is 1 5/16" long and 9/16" wide. The two prongs that snap into the window mechanism are 5/16" long and centered below the thumb latch which is also 5/16" long. I ordered some latches from you a couple of years ago but they are too small.

only need the door handle not the complete set with the other side with the lock

Outside 5-1/2" distance between center of handle and center of cylinder 8" distance plate screws inside 2" distance between plate screws on both interior handle and interior thumb turn 1-1/2 door thickness

Mm (millguard) coil balance. Need help identifying replacement parts

I have 3 patio sliding doors where the locking mechanism no longer works. I would like to replace them. It looks like they are a SWISCO product. Can I order replacement door handles from you that will fit?

Needing some help identifying this part

It is broken ? I'd like to purchase several in the event others break as well.

Do you have this part of something that will work? My cabinets are only 6 years old.

Measurements: 7/8" thick 1-5/16" wide 1-1/4" high Shoe is attached to a triple spring coil spring. Not sure what brand of vinyl window this is from, but I'm thinking maybe a Simonton.

I have a Pella patio door and my rollers are worn your product code 81-098 seems to be the one I want, but it does not have ears to prevent it from fitting too deep into the door.

Need to replace mortise lock. Hook lines up correctly, but the hook and latch is loose. Can open door in locked position.

Looks like there is a # 9

I am a lead maintenance tech and I need that part

I'm looking to find a replacement for my window balancer. I have a handful I need to replace so I don't have all of the sizes/markings yet, but I wanted to start with this one so I can buy two. Thank you. Markings: 86 29-4 FC5 CMC 08 Channel Length = 30"

Roller assemblily for sliding glass patio door. Older no markings. Steel.

Can I buy just the wheel and it's piece that slides into the mechanism or do I buy part # 23-064. It appears to be a perfect match. Justin-

i need 4 of these. it is a tilt latch on a single hung window

Drawer slide 21 5/8" Cabinet bracket 23" mounts into plastic bracket in back of cabinet.

I have this 3 panel sliding patio door. One of the stationary panels is missing a bracket. I'm not sure of the manufacturer of the door, but all our windows are Anderson. Home built in 1995. Do you have a bracket like the one I've sent a picture of?