Viewing all customer Discussions for:

Other

I have a old mobile home that has alum frame windows that needs hareware plastic parts can you help me.

The thumb latch broke on our patio door. The patio door has double mortise latch with an anti-slam button, the bolts for the handles are offset at 3-15/16 inches and the thumb lever sets an inch above the bottom bolt. The door and trim is white. Would the thumb latch replacement part 82-107 work wi ... (cont.)

Hello,I need the lock catch for the New Castle XT /Insulate 960.We removed the dog door and we can not find the door catch that the lock goes into.The lock is a three prong with the top and bottom catching inside and the middle one is a press in button of sorts that allows the upper and lower to rel ... (cont.)

Hello , This is Bill with Arizona Hardware , I have an old Imperial Keynetic pull with backset # 5820.170 and keeper I need to replace , the finish in satin nickel .I would like to get as close as possible in style and color it can be keyed or a patio function . It looks like the 82-030 & 82-2 ... (cont.)

Looking for clips for Phillips storm window Which holds the 2 pieces of storm window together

I believe the 39-253LB would the correct replacement part. Just want to confirm.

Needing the piece in first picture I believe it is a guide. Need part in second picture on left.

Hello, could you give me an idea what parts are available in your stock to replace bottom track and rollers of sliding doors. Thank you in advance. Regards. Victor

Problem: The plastic mounting brackets for the casement window multi-point sliding locking bar are breaking (20 yrs old) Desired Solution: Replace multi-point locking bar and mounts Data: Lock Rail 39" x 1/2" 5 brackets per rail Bracket 3-3/8" x 7/8"; 2-Mounting screws 3" center

ItemReturning: Item 84-152 Item 59-054ReasonForReturning: Item 84-152 wheel was too small. There is no description on your site as to the width of the wheel. Everything else on the roller matched what we have. You should add the width of the wheel on your site. It doesn?t saddle 1/4? track. These ar ... (cont.)

Hi, I have an installed 1989 Great Lakes Window (bow) with two casement window on each end. The left casement window, the window can open with the handle but won't close it with the handle. It looks like the operator part that connects to the handle is stripped. I found serial numbers on operator ... (cont.)

Good Moring I'm trying to figure out what part I need for a window repair. Can you help me please. thank you.

The weather seal shown is from a wooden Pozzi casement window circa 1980. Dimension of side with return that fits into a slot in the wood frame is just over 1/4". The dimension of the bottom , sealing portion, is 7/16". It is a plastic material that has become brittle over the years. Can you pro ... (cont.)

Are these available on your site?

Do you have this flush bolt?

Hi, we are looking to replace the existing weatherstripping with ones that provide better coverage, the contractor's recommended size is; .187" x .400H" in white preferably or another color if it is the only one they have. thank you so much.

Missing rubber bead on one half round window. Pictures shows frame side and one is a side view of the rubber beading. Open to ideas for replacement. Exterior face of rubber is 7/8 inch and extends 9/16 out at base.

I see you have several types of corner pieces with the "feathered" edge. I don't see any marking on the frame itself. In the photo, I forgot to include the thickness of the part that's inserted into the frame. It's just over 5/16".Thanks.Tom

Please see images above

Hello I am looking for these parts, both left and right sides. The side rails are unigrass 6600 series and measure 19 3/4 inches. I also need the back holding bracket both left and right the bracket moves back and forth left to right with markings on the back that say pat's 5.359.723 and 5.349.723. ... (cont.)