Viewing all customer Discussions for:

Other

Roller window PN 2111D 7-M10-173

we need to replace this track for a Monarch mirror door system. The part # 23-272 appears to be compatible but we will need a longer length that 71 inches Our current track is 72 inches. Is that length available? Thanks for any information or suggestions.

Need rovots or rivot size for S800 channel balancer to replace the shoes and top pieces already ordered

Wonder if you have anything close to this style. I have already tried one similar to 23-049, but with the adjustment nut it was too wide to fit into the actual pocket. Thanks

The only number I can find is 12199696060 34, which is on the door. The current handle (inside) came apart. I have not tried to take it off the door yet. Not sure if I need a replacement door handle. Ozzie

These are on both sides at the top of each balancer. They have two screws to attach it to the sides. So I need a total of 12 (6 windows)

Stamped number on balancer is 28D. It measures 29" long. I need a total of 12 new complete balancers for 6 windows. Windows are 16 yrs old, Label states it's a Milestone Horizon Roller Series 1000

I am needing this type of weather stripping. Can you help me? Do you have something like this? This is similar to the measurements of the gasket that I need.

I have a sliding glass door installed in 1989. I think the wheels need to be replaced since it is very difficult to open and close the door. From the glass I found these numbers. PPG Herculite K BS 6206A 16CPR1201 CII SGCC-675 6014187. Can you tell me what wheels to buy or maybe a contractor in ... (cont.)

mortise mounting holes 8 1/4 , black part 6.828 long width 9/16

I have windows that are 743/4" X 503/4" and need balancers

we only have the name of the distributor (A WINDOW INC.) in Forthworth TXwindow type (SH25/31 Single Hung-Vinyl Frame)

Full name: Austin Channel balance series: S390Channel length: 44Channel stamp: 4350Quantity: 24

Good morning looking for this self close cabinet hinge. Manufacture name is AILOPO . Thank you

Not sure which side of window this goes on, but looking for the opposite for the other side. I need both pieces and possibly the screws to mount them both as I have none. Please and thank you.

I had carpet and now have refinished the hardwood floors that was underneath. It looks great. The closet door hardware is probably 70 years old and the 2 separate old floor guides already sat on an ugly extra little piece of wood about 5.8' thick which they had carpeted over. Now there is going to b ... (cont.)

I'm looking for a replacement for my white 28" channel balance. It has a 2800 BL stamped on it, I think I found a similar one (28" Series 770 Balance - Product Code: S770-28), but that one looks silver, is that part available in white?Thank you,Mike

Need two replacement balance springs Length of metal portion of balance spring is approximately 32 1/2" Width is 1/2"

I purchased replacement thermal guard locks from you. However, I cannot get the old ones off. Is there something else besides the screw I need to do?

Looking for that part (pivot bar). Can't find manufacturer of window. See pics