Viewing all customer Discussions for:

Other

Looking for balance replacement for this original balance. After speaking with customer service, they stated it needs to be custom, with a 15-044 attached. I am looking for a quantity of (20)

HelloSorry for the poor quality pix but it was the best I could do.This window is approx. 22 X 32. It's a International Window casement type.I'm hoping for a top/bottom set. Regards, Harold

I need two balances for my kitchen window. The window is single-hung, non-tilting, and the dimensions are approx. 50" w x 32" high. I have opened an on-line account so I can purchase the balances once I know what to order. Please advise

Before I remove these doors I want to try to repair them. Here is a link to the parts I am asking about:https://photos.app.goo.gl/cbQMRLUs1QcpNkSe7These are for bifold doors. The slabs are still in decent shape but very thin, not like the thicker slabs you see now. I will attempt to refresh them be ... (cont.)

I am looking for this part. Wondering if you can help me.

I need a replacement crank. Do you have any like this?

I have Anderson sliding doors 3 panel they were installed in 1999 I need the weatherstripping that goes on the side of the sliding door and meshes with the stationary door I tried Anderson they say the no longer make it I took pics there not the best I tried I would need roughly enough to redo abou ... (cont.)

The assemblies are white plastic, brass concave wheel, 1 9/16" long, 3/8" high, 1/2" deep, 1/2" diameter wheel. Each one is held in by the corner screw that I believe also holds the brown aluminum frame together.

This is what I 'm looking for

I am looking for the seal that goes behind an aluminum strip. 1 and .25 inch wide with a round seal at the end. Salt water application.

Please, advise on these old rolls for sliding windows.

I know the addition to this house was built in 2006. I have several operators that need replacement but I can't seems to identify them. Hoping you have a suitable replacement. Thank you!

S390-23 My top shoe looks to be the same, the bottom shoes' measurement is 1 1/8" mine 5/8" is this available or will another one work

One side of the window coil broke and window not staying open firmly. I don't know what coil or parts needs to replaced. Can you please help in identifying the replacement parts from the pictures

I'm looking for a pair of nontilt block and tackle channel balances. Attached are the pictures of the block and tackles balance. Please advice, thanks.

Need to I'd this part asap please and thank you

This is the top pivot for a bifold door. The nylon nut is stripped and therefore I am unable to make a tightening adjustment. I would love to be able to replace the nut (1/2" x 1/2") with a metal one but go with nylon if that's the only option. I'll go for replacing the entire assembly if need be ... (cont.)

I have had a client looking to replace the part pictured from a wardrobe door, purchased in UK a number of years ago from a retailed now defunct.

RIGHT HINGES NEED REPLACEMENT

Double hung windows need sash locks parts. Both screw holes are 2 inches apart