Viewing all customer Discussions for:

Other

Looking for a corner cabinet hinge that attaches to the cabinet side.

large 48" x 48" lower sash aluminum frame pivot and balance retainer

I do not know the manufacture. The date on the door is April 1969. I have some old parts. I need sets of complete parts including all the plastic bushins and pivots.

I want to install a new screen in my Larson screen door. The door I D is - 35048032.1310511109. Its about 15 years old. It has 2 groves about 1/4" wide. I need the rubber spline. Do you sell it?Bill

Good afternoon I'm trying to repair some window balances for a set of Acadia windows Thank you

Please let us know If there's a way to replace these old cranks all together? Some just need replacement handles that aren't available nowhere. Do you have a replacement handle as well? Thank yiu

Roller window PN 2111D 7-M10-173

we need to replace this track for a Monarch mirror door system. The part # 23-272 appears to be compatible but we will need a longer length that 71 inches Our current track is 72 inches. Is that length available? Thanks for any information or suggestions.

Need rovots or rivot size for S800 channel balancer to replace the shoes and top pieces already ordered

Wonder if you have anything close to this style. I have already tried one similar to 23-049, but with the adjustment nut it was too wide to fit into the actual pocket. Thanks

The only number I can find is 12199696060 34, which is on the door. The current handle (inside) came apart. I have not tried to take it off the door yet. Not sure if I need a replacement door handle. Ozzie

These are on both sides at the top of each balancer. They have two screws to attach it to the sides. So I need a total of 12 (6 windows)

Stamped number on balancer is 28D. It measures 29" long. I need a total of 12 new complete balancers for 6 windows. Windows are 16 yrs old, Label states it's a Milestone Horizon Roller Series 1000

I am needing this type of weather stripping. Can you help me? Do you have something like this? This is similar to the measurements of the gasket that I need.

I have a sliding glass door installed in 1989. I think the wheels need to be replaced since it is very difficult to open and close the door. From the glass I found these numbers. PPG Herculite K BS 6206A 16CPR1201 CII SGCC-675 6014187. Can you tell me what wheels to buy or maybe a contractor in ... (cont.)

mortise mounting holes 8 1/4 , black part 6.828 long width 9/16

I have windows that are 743/4" X 503/4" and need balancers

we only have the name of the distributor (A WINDOW INC.) in Forthworth TXwindow type (SH25/31 Single Hung-Vinyl Frame)

Full name: Austin Channel balance series: S390Channel length: 44Channel stamp: 4350Quantity: 24

Good morning looking for this self close cabinet hinge. Manufacture name is AILOPO . Thank you