Viewing all customer Discussions for:

Other

Here my pictures and diagrams…. I will also include two photos to see if you think that this will work. The one part is just shy of a quarter inch. The other measurement is just shy of a half inch. Thank you.

I am looking for a replacement for the attached Grant door roller. ¾ wheel, ½ backset, 3/16 thick wheel, 1/8 gap behind wheel, bracket 2¼ wide x appx 3" tall. Thanks, Kirk Harris 304-612-6335

I am a contractor and a sigle elderly woman in her 90s had me come take a look at some double pane windows that were replaced 4 yrs ago and the glazings were incorrect and the glass is on the verge of falling out. The pane and the channel in the aluminum frame are 1" thick. There is a 3/16-1/4 gap ... (cont.)

I have many of these folding closet doors that are missing this particular part.

LH side is totally missing. Afraid to breah the other side removing for photo. Thanks for any help

Hello I am looking for pricing for the following stop. The dimensions are 5/8” x 5/8”. Thank you.

Please help locate the pivot pin. Thank you! The part is from a Simonton window.

Hi, Do you have anything that matches? Thank you

mirror doors are 30"W x 771/2"H and track is 60" L x just under 4 3/4"W I am in need of a new lower and upper track (white.) also would like to replace wheels if possible, and upper guides on doors. If helpful, I can provide a photo of the Stanley label on the back of the door. Thank you! ... (cont.)

Width 9/16, length 2", heighth 1 3/16. Wheel size 1 1/4"

I need ones that look like the one on the left, not the right.

Hello, where I purchase a new roller and is there procedures on how to replace the roller? Thank you

Hi, I believe the width for the guide is 1 3/8 or close. The color is black.

2.5 '' x1.5 tall x.75 wide

Please help me identify the replacement part, thanks!Chris

Pacific industries

I need this drop down plastic holder that holds a slide for a drawer

I am looking for placement rollers and top guides. My house was built in 1993 and the sliding glass door is original. For the roller assembly: H: 1 9/16" W: 7/8". L: 2 1/4 " Wheel diameter: 1 1/4" For the top guide: Wheel diameter: 1 1/4" I bought assembly rollers from home depot that d ... (cont.)

Loving for replacement shoes at this time.

We have some older double-hung tilt-in windows. Most work perfectly. One is in need of new hardware all around. Pivot shoe, spiral balance, and pivot rod. I found everything on your site easily except for the pivot bars/sash pivots (not clear on proper name in my case). The attached pictures are of ... (cont.)