Viewing all customer Discussions for:

Other

My sliding patio door lock appears to be worn out! Cleaning and applying WD - 40 helped fo a very short time, now I suspect it's time for a replacement. Do you have anything that matches up with the attached photos?Waiting for your advice.Thank you!David

Need 17 feet of track for Milgard sliding screen doors.

PGT no longer makes this weatherstrip for my casement windows which are less than 7 years old. The current weatherstrip is falling apart on most of my windows.

Hello,I need to determine the correct replacement for a Plygem casement lock as noted in the photos above. The lock cannot be fully engaged, as noted in the photo showing the latch 3/4 of the way down. The actual lock bar mechanism is intact. I do not have any other information other than what ap ... (cont.)

Do you provide replacement Insul Sash window sashes?

Assembly dimensions approx 7/8 dp x 2 3/4 h x 1 1/4 w Shoe 1 1/4 w x 1 1/2 h x 7/8 dp hard to read but appears coil stamped 10J Shoe needed

Hello, I have 3 windows were 1 of the 2 channel balancers broke. I am looking to replace them but having a hard time matching them to find the right replacements. Two are on the same sized window but one is on a thinner but taller window. All three are identical top and bottom with the same 'hoo ... (cont.)

I have a number of broken/missing window latches for single-hung single-pane windows. I attached pictures. the piece that the latch pivots on is broken (or partially broken) on many of them. It looks a little like 90-182 but definitely does not match. Your picture shows that the "pivot piece (aka p ... (cont.)

Pivots window so you can wash both sides. Do you carry this item?

Latch is 2-1/2" high x full width is 1-1/2" wide Number stamped on the window is either IGCC-382CBA L-K or 1GCC-382CBA L-K

It appears you have either a Series 380 or Series 385 channel balance.The difference between the Series 380 and Series 385 balances lies in the shoe.The series 385 balance has the 15-004 shoe which is slightly larger from front to back, as illustrated.If you measure your shoe as it is pictured here, ... (cont.)

The rollers on our 5 foot wide and 8 foot high Air-lite Lanaidor sliders (2 of them) have finally stopped working. Do you have new rollers for those doors? I called one (seemed very knowledgeable)person who quoted me $500 for roller replacement, and that I would need to change the glass. My mothe ... (cont.)

Hello,I am looking for a replacement hinge for Mepla 510 356 00 13 hinge since I understand they are not made anymore.thanks,Bob

I am looking for mortise lock for my sliding patio door. I saw one model on this page but was not sure if it is the right size and model. Can you check this out for me?

Hello, recently purchased a swisco key lock and door handle after watching this video, https://www.swisco.com/videos/view111. I have a sliding door unsure of type and brand of the sliding door set, doesn't have a key lock and wanted to install one after watching that video,just want to be certain th ... (cont.)

I would like to purchase this glaze for my 6x6 ft window.

Looking fore replacement latch for the other side of this screen

Please notice that in the diagram that I printed from your website and edited with the dimensions noted, there is no drip lip as seen in the photos for the top seal. Please let me know if you have anything you think will work for these doors. I will be ordering in bulk if you can help me out!Thanks, ... (cont.)

I need the pictured jealousy part. Please advise if you can sell me the part. Customer has this part in bathroom shower window, the window is a narrow window, between 15-18 wide if I had to guess.

Hello, I am having trouble finding a suitable window operator replacement for the attached photos. The window operator arm often falls out of the track when opening and closing the window all the way. How should I fix this? Will replacing the window operator arm resolve the issue? If so, which repl ... (cont.)