Viewing all customer Discussions for:

Weatherization

Pictures of what I have. Need replacement, Pic 1: Shows the end and how it is ripping off Pic 2: Channel width -- 2 quarters fit in Pic 3 and Pic 4 : dimension Thanks. Rajiv

The pile insulation on my doors need to be replaced. When I measure the insulation it looks like 2/16 inch wide. Do you have pile insulation 2/16 in wide? The doors are over 20 years old.

Have two entry doors that need new weatherstripping all the way around. Photos included. Need under the door strips with a c-shape profile. These doors are the original installs by builder Gary Gardner in the early 80's in Medford. My windows are Anderson but I don't know if the doors are since ... (cont.)

Hello there, I got this piece off of my sliding closet door but seems to fit the sliding glass patio door as well. These are town homes so it seems like everything is standard all windows, closet doors etc seem to be the same size. I'm not sure what the minimum footage to order is but I'm thinking t ... (cont.)

we have a Vista Wall door at our retail store that is in need of a new seal. The double door is 7' tall and has a twin set of brushes on only one side. The brushes slide in a track that looks to be about an 1/8" wide and the gap in the set of doors is 1/2". Any information would be great. Hopefully, ... (cont.)

From a circa 1994 Cole Sewell Storm door its a retainer strip it holds the window in place in full storm door...it is essentially plastic. Made to pull out and put in full screen in summer Any similar will likely do Need for top and 2 sides or cut to fit like 15 ft worth

The doors of my house are trimmed out to fit the 81" compression kerf style as shown in your Prime Door Seal Set. Can I just buy just the 81" compression piece from you? I would need a total of 12 pieces. Thank you, Ben

1. Do you slide or push the seal in the groove 2 on the corners do you bend the seal around the corners or do you cut at the corners

Hello, I have a french door in the master bedroom that need to have the side weatherstripping replaced. It looks like it is rubber with a type of fabric covering. It slides into the door and that dimension is 1/4 inch. The other dimension for the stripping is 1/2 inch. Do you have anything that ... (cont.)

Greetings, I recently purchased a replacement strip of bug flap for my sliding screen door. I ordered p/n 59-058 which has and 11/32 wide fitting strip with total width of 13/32 including the barbs. That width is just a fraction too small for the channels on my door, as the strip fits very loosel ... (cont.)

I am looking for the glazing bead for window series 1180/1480/1580/1980

The windows are fine, old but ok. The weather strip has disintegrated from direct sunlight. Cannot find replacements.

I have MI window, the bottom side plastic seal needs replacement, do you have this item in stock? See pic, thanks

I have white in-swing, both sides open, Jeld-Wen patio doors that are solid wood with a covering that I assume is steel. The markings are NFRC 100/200 Series Doorcraft Steel W/E door MST 3068. The doors are 34.25 inches wide with a 0.75 inch strip attached to the right hand door. The height of the ... (cont.)

This weather strip is from a weathershield door from the 80s. I'm not sure of the profile because it's well secured into the jamb. Do I have to take the jamb apart to get to it?

I was just looking at your site, to see if I could order a 48 inch bottom door sweeper replacement 48 inch is hard to find, Home Depot and Lowes don't carry....enclosed is picture I was going to order 58-190 48.25 high Performance one, I believe it's glued on won't know till I take the door off, is ... (cont.)

Hello - I'm looking for replacement window balancers and weather stripping (if possible) for vinyl windows that are otherwise in good shape. I do not know the window manufacturer unfortunately. Attached are photos of the window balancers in one of the windows and the sash label with a bar code and ... (cont.)

Need to know what weather stripping I need for my Pella french doors. The weather stripping available at Lowe's and Home Depot doesn't work.

It has been very hard to find replacements for this pile weatherstripping. We don't mind replacing it with something else that would serve the same purpose, but would love to keep air from coming in the between part of the sliding door. Thanks for your help!

I am looking for this weather stripping that comes from 30 year old WS windows. I found a picture of the part (or a close facsimile of it) in the Weather Shield catalog. I also included an image of an intact one in my casement window, and then a removed one that is torn. The tear is on the part tha ... (cont.)