Viewing all customer Discussions for:

Weatherization

Looking for weather striping for Weather-Shield Legacy casement windows from roughly 2001-2003 timeframe. Picture of what I need is attached. Can you help? Can you get it? Meant to say double hung windows that tilt in to clean.Thanks

I have SeasonShield windows installed in 1999. I need the bottom seal.

Piece is "T" shaped with 1/4" piece that slides into channel in door jamb. The exposed piece is also 1/4". The door is original to the house built in 1965. Thanks!

Replacement windowstripping: The tag on my window says Arci company. 39 3/4 x 45 1/2 white D/H conc Hdw, classic white, Low E argon DS, expander, white, 1/2 can, white. To me it looks like a 3/16 inch wide, the fan appears to be 1/4 inch tall.

We need to replace weatherstripping on our original Alenco windows from this 1996-1997 home in Houston Texas. I cannot identify model number, but they are single hung, aluminum framed, single pane d Attached are pics of the cross-section of the said part. It no doubt was round, but is squashed over ... (cont.)

I have Anderson eagle casement windows. All the weatherstripping has deteriorated. It had a flat weatherstrip previously. I need for all my windows on all 4 sides. Please advise what to buy. Thanks

Hello, I'm trying to find window weather stripping for my Caradco casement windows - both single and double. The stripping now is the bulb-type on the 'house' window frame, and the leaf-type on the window itself, all 4 sides. FensterUSA no longer supplies weather stripping for the Caradco windows.I ... (cont.)

Have two entry doors I need to replace thresholds. Would the 58-189 be the replacement?

I've got 20 year old Caradco windows and the weatherstripping has gotten brittle and needs to be replaced. Can you help me with this please? Thanks, Frank

Looking for factory replacement pella front door seals.

I'm trying to help someone e who has a house full of casements supposedly manufactured by Thomas-bilt of lapeer mi. now out of business. The weather stripping after some 35 years is all disintegrating. Help me find a matc to the leaf stripping. Photos enclosed.

I need to replace the weatherstrip on my 1996 vintage Wenco casement windows. Can you identify this weatherstrip please?

Looking for replacement weather stripping for my 2005-vintage Crestline patio door (French-type, sliding). It is about 1/4" wide, compression-type, beige in color.

This is the part of the window that connects ro the window balance tilt boot.

this is the bottom of the window and the weatherstrip is what I need to replace

Seals are marked QLON. Hard plastic I beam embeded in foam and covered son soft vinyl. Fit in slot on window. Bottom of seal is 7mm. Narrow part is about 5mm. Top of I-beam is about 9mm. Bottom to top of seal is 12mm. I have found QLON parts on the internet, but not with this I-beam constructio ... (cont.)

Hi, I am trying to find a replacement vistawall weatherstrip for a bottom door. I need two. Both would be 28 inches long and 7/8 inches wide, with a channel depth of 1/16. Thank you.

approx. 1/4" diameter bubble, approx. 1/4" base. Is it 58-055?

We need black or bronze.at least 40 inches wide.i see a product on your site that is close,but it is white.product code 58-183.if you could help me out I would appreciate it.Thank you,James

Do you have this strip for my windows Thank you Michel