Viewing all customer Discussions for:

Weatherization

Need bottom seals for 7 windows,

Is the SWISCO 58-173 a replacement weatherstripping for a 30 year old Pella entry door. It seems to match up in most respects.

I am attempting to indentify weather seal for casement window from the attached pictures.

Attached is the weatherstrip from my window, can you please tell me which product matches it? Thanks, Paul

I need to replace the bubble seal(?) at the bottom of my Traco TR911 windows.Can you tell me which seal I need? Mine is crumbling so I couldn't get a very good picture. Hope the model # helps. Windows installed in 1998.

Replacing the two types of weatherstripping used on a Stanley "Sta-Tru" exterior door. I've attached a profile of both and the door ID label (if that's of any use). Please note the one weatherstripping has a magnetic material. Thanks!

The 3rd pic shows the plastic stripping. The middle pic shows it installed in the window. It goes at the top, bottom & both sides. The first pic shows the window without the weather stripping. We were told by a local glass company to just caulk the window. We don't like that idea. The sun has ... (cont.)

weather stripping on metal garage door into house. Installed in 1988 / 89 Stanley door

The marking on the door says "legance 3 patio door, type DDSG, code TRI - K - 36". The part is basically a rubber T that slides into the bottom of the door frame with the long leg fitting into a groove in the door frame.

I am looking for a storm door sweep like the one pictured above. Sorry that the picture it upside down. The measurements are with of top spline is 3/8", length of sweep flaps including spline is 11/16". Thanks for any help ypu can provide.

We need replacement weatherstrip for Gorrell vinyl casement Windows. There is printed Q-LON on the weather strip The weatherstripping has a vinyl covered T shaped , rigid plastic part that slides into a 1/8 inch groove along the outer edge of the frame surrounding the glass. The slide in tang ... (cont.)

Window manufacturer windowmaster vinyl

My roll out windows trim has hardened and is falling off the window. Windows were installed during construction 30 years ago. High end construction by builder. Unable to locate window mgf.

Hi,Appreciate your video tutorial on Youtube at https://www.youtube.com/watch?v=PCDAQ3Su88Y. We have Milgard horizontal dual pane vinyl windows installed when we built our house in 2003. I can see how to remove the weather seal with a screw driver and slide it out. It appears our windows had the wea ... (cont.)

Hello I am looking to replace the weatherstripping on my house I have a number of double Marvin casement windows. I would like to replace the weatherstripping with something that is very energy-efficient. I also need to replace the weather stripping on 3 glass doors. Attracted are pictures of the we ... (cont.)

Hello Support. My name is Roumen. I have been working on the Balance and Pivot Shoe replacement with Manuela and Tom and I have all the parts identified and ready to order. Before I place the order I wanted to get one more part for the same sash, but was told to create another discussion. I need the ... (cont.)

Hi, I have a 72" double door. The stripping between the 2 doors is coming off. The stripping seems like vinyl. Do you have the replacement. It is a BWI door.

Trying to find replacement weatherstripping for front door. Cording slides/locks into door jamb. See photos. Thanks.

Weather Stripping at botton of Certainteed Sliding windows need replacing

I cannot find a brand name anywhere on this door but I believe it to be 40 years old. The hinge says Ideal HW. I believe I need grey 9/32" X 1/8" wool pile.