Viewing all customer Discussions for:

Weatherization

Hoping you can identify this. Thanks

Replacing all parts on old aluminum windows

I have built 6 replacement doors all with the same weatherstripping. Can you match it?

I have 40 rental properties with these windows and desperately need this weatherstripping. The one edge has a pliable edge which you can see in pic 4. I have tried a couple of samples from you but they will not stay in the track. Please help. Thanks.

Hello, I'm looking for replacement weather stripping for Cardinal Sigma crank-out windows. The house was built in 1976 and these are the original windows. Old stripping is brittle and chipping off. It's included on all four sides of the window. Picture included. Can you supply this replacement ... (cont.)

Hi, I am reconditioning my 25 yr old wood casement windows and the original weatherstripping needs replaced. I have not been able to locate this (original) 'double fin' type, so I had been thinking that a 'kerf mount bulb' would do as a replacement. Is the 'double fin' that I have available? ... o ... (cont.)

This seal runs the full length of the width of the window. This item is approximately 0.41" / 10.42mm wide. It is approximately 0.08" / 2.06mm tall - or - thick not including the "tree" extension that fits into an aluminum extrusion. This piece is not or has no magnets.Any chance you can help me lo ... (cont.)

I am hoping to find new buble seal for my windows. Hope you can help. I think these windows are from the 80s.

I have casement windows. This weather stripping is stiff plastic and goes completely around the sash. See pics. I need to replace it all. I have 35+ windows.

Good morning, my windows are longer than 38 inches. Is your product designed to be cut and spliced to accommodate the difference?

Have 3 Wenco windows that need new seals.Are they available?

The measurments are 1/4 inch by 1/4 inch for my window

Can you help us find this. Our home is 20 years old? This is the bottom stripping. Thank you Eileen

Do you carry this weather stripping it runs Horizontal on my sliding widows? See pictures

I unfortunately didn't find any name or markings on the strip. It is 1/2" wide. The windows were installed in 1999 when the house was built. The weather stripping seems the same all around the window. The window has a THIN routed groove and the weather stripping has a bead that fits into that.Thanks ... (cont.)

Hi, I would like to replace some sliding glass door bearings. I need 4 sealed bearings total. 1.5" x .25" Also 4 pieces of furry grey or black weather stripping. (Or if there is a better product you recommend.) .25" insert tab width. Length 36". Depth 3/8" Thank you, Jesse

I am trying to replace the kerf style weather stripping on an exterior door. I am having trouble finding replacement weather stripping that has a wide enough Kerf. I need 1/4" wide. The groove in the door is 1/4" wide x 1/2" deep. Everything I have tried is too narrow and just falls out of the g ... (cont.)

Half inch diameter

We need replacement stripping for our windows and we're told by Weather Shield that they no longer have the parts.

This gasket has a foam core and is encased in a soft vinyl sleeve with a molded lip that would slide into a channel in the lower sash of the Patriot window. These windows were installed in my new home in 2001.