Viewing all customer Discussions for:

Weatherization

I'm looking for pile weather stripping to repair a few windows. I wasn't able to find the manufacture of window so I need some help to figure out what product will work. The pile is 1/4" tall (image 3). The width of the stripping is 3/16" (image 1 & 2).

This part installs length of door both inside and outside.. 2 PCs.

That's a bit of picture I don't know

Weather stripping measures 1/4" base and pile is 1/4" high

I have an older Marvin window and along the inside of the frame is this bubble weatherstrip that is cracking. I don't see the "T" shape 5/16" plastic piece with the bubble on top on your website. I am guessing would the push-in 5/26" 58-053 work? Thanks for your help.

I have about a dozen of these windows in 4 sizes. The most important thing would be to find the correct rubber seals. With seals I can leave them closed and stop drafts. If I can get seals I'll attempt to repair any parts that keep some of them from operating correctly. If nothing but seals are av ... (cont.)

Do you sell this type of weatherstripping for wood casement windows. The window were installed around 1983. What is the name or style of this weatherstripping? Thanks

The windows were manufactured by Viwinco as a regional manufacturer for Certainteed. on all of the windows, the outside seal is pulling away from the window at the point at which they seal slides into the seal track of the window. I am looking for replacement seals. I've already been in touch wit ... (cont.)

The window is a SUN brand. Installed about 1996. SUN no longer offers glazing for these windows. I believe the size is 3'x5'2". SUN person thought that they were 2 pc glazing- it is vinyl. I can get addicted information and better pictures Do you offer a sash or glazing that can replaced the cl ... (cont.)

I need to replace the rubber sweep fins on my 2 Chamber Storm doors adjustable bottoms part # CELIS36WH.

HaD condo bUILT in 2006/Centex homes. Have never removed screens.Homeowners association states some screens need fixed;my Husband and I removed 17 OF 20 SCREENS. While removing;noticing thet SCEEN PLASTIC/VINYL?? WEATHERSTRIPPING IS VERY DIRTY AND WORN. NEEDS REPLACED.Called local Centex homes;# doe ... (cont.)

HiPlease see the attached photos of my window and parts. The bubble weather-strip is deformed but appears to be 5/8" in diameter with a 3/16" base. The pile weather-stripping has a 1/4" base and appears to be approximately 3/16" in height. I need approximately 27-30' of the bubble seal and 85-100' o ... (cont.)

The sides are a standard foam compression seal like 58-056E, but while the bottom is a similar shape, it is larger and a very thick vinyl. There is a very large gap in the door threshold to fill. Thanks!

Simonton windows. Installed 2001. Cracked and worn mainly due to south facing windows.

This is an old Brosco window the stripping slides into the grove it's a 1/4 inch

Weather stripping for Kolbe windows and doors!,,

These are from a aluminum window they slide on the bottom of window and the other one slides at the top. They are pretty warned down I'm not sure what the original height is . All send another request with pictures of the other 2 wool pile that go on each side of the window their height is not a ... (cont.)

Sear Tech Support, I have a Sliding door with Herculite K tempered glass (White) and I want to replace the instillation foam between the 2 doors. I took pictures of the existing foam and I attached it to the email. If you could please tell me what would be a good replacement foam (white) for my exis ... (cont.)

I'm looking for replacement weather stripping in the format shown in the picture. Suspect they're Anderson windows but haven't found any identifiers. House was built in 1995

I need this same bead, but my picture window is 84" long. Is this an extrusion or molded? If extruded, can I get longer pieces?