Viewing all customer Discussions for:

39-091 ROTO Casement Operator

The ferrule acts as a bearing that the hole in the end of the arms attached to the bottom of the window rotate around. The ferrule is broken so the arm attachment point is loose and gets hung up on the broken ferrule and you can't get the window closed without a lot of manual manipulation. The scr ... (cont.)

These Solar Industries Inc. windows were purchased in April 1999 through Home Depot. The window mechanisms seem to work fine except that the hand crank part is breaking on all of them. There are five, 18x60 windows in total. I'm attaching photos. I would like to know if you have the parts available ... (cont.)

This is the photo's on my window crank. The only other thing on it is INTERLOCK world patents made in new Zealand.My name is Tom Seaway company sent me two arms which are about 1/4" To long. That is why I sent you the picture of the arm measurement.Thanks in advance. if you call my home and no one a ... (cont.)

I need this in white (1) and 2 in Almond (RH)

Hello I'm looking for an additional window crank as in the picture. It's 5 inches wide and arms screw in at bottom of window

The piece with the broken end is 5 3/8 long Left hand window Thank you Tom

I have several Gorell casement windows that use this "arm" to connect the crank to the window. Several are broken. I need to identify it and find a source to purchase. Thanks in advance.

Hi, I need some help finding the replacement for the right and left window cranks in the pictures attached. Thank you, Terry

Hi, DO you happen to know if you have the attached casement window track slider replacement? thank you

Looking for a replave part here that links to the window

Looking to replace crank unfortunately we can not even find a mark on window to find brand.

LOOKING FOR COMPLETE CASEMENT HARDWARE FOR SOME OLD (2000) MILGARD WOODCLAD FIBERGLASS WINDOWS. FIRST TWO PHOTOS ARE FOR SASHES 26.5"W X 44.5"H. THIRD PHOTO IS FOR SASH 20.5"X 50.5". ANYTHING AVAILABLE

Good Afternoon, I'm looking to replace several crank operator hinges. There are no markings on the vinyl windows. I do have one replacement hinge, but I am looking for more. Any advice would be greatly appreciated!

Is 39-091 or 092 the correct replacement part for crank in pictures ?

Dear Swisco, I am looking for a replacement for a window crank mechanism shown in the attached photos and that has printing on it, "Interlock(TM) world patents made in New Zealand design pat. pending". In addition to showing pictures of the upper and lower sides of the (removed) crank mechanism, I ... (cont.)

Can you help me identify this operator? It's from a Gorrell window. The cover is ribbed. Thank you

my casement window operators are failing. This is the one that the window opens clockwise (or maybe to the right) and the other side that opens counterclockwise (or to the left) is in such bad shape that the window can't safely be opened without a person on the outside to catch it. Can you help me i ... (cont.)

1. casement operator is broken, please refer to IMG_1049 photo above 2. photo IMG_1050: window with broken operator 3. photo IMG_1051: a good one for reference. Please kindly advice replacement parts, thanks a lot. this window is installed in 2007.

Need to replace crank system. I believe a gear has some missing teeth. Looks I just need the crank body that has a single, short arm extending. Can't be certain but I don't think I need to replace the multi-arm scissor assembly. This particular window cranks from the right side, but I need both sid ... (cont.)

I am needing a replacement crank assembly for a casement window of unknown manufacturer. Thanks for any help you can provide.