Viewing all customer Discussions for:

39-104 Handle with a 3/8" Gear Bore

Hello.. my name is Mary I'm looking for some replacement windows cranks... do you think you could help me out? The windows are very old...

Hello! One of our window cranks has broken and not sure exactly what/where to replace. I've included photos. Please let me know if you need anything else, thanks in advance!

I am not sure what the bore is on this particular device it could be 11/16 or it could be 3/8. I'm not sure how do I how do I know I'd like four handles OK

Looking for replacement window crank

I need help identifying which crank handle to replace these old ones with. I am unsure if the handles were ever replaced. The windows were installed in 1970s. Thank you!

Do you have the 901 awning window crank handle in white ? The crank handles are 3/8's -- Do you have the corners for screens ?Thank you

I am looking for a handle and screw. Thanks

Looking for Eagle Window foldable crank handles. For a 3/8" spline in bronze

Looking for replacements that will open and close windows properly

hi,i need your help with identifying jalousie window handle opener replacements for 6 windows that were installed in our home between 1970-1975. i've attached a few pictures of the current handles. if you need additional information and/or photos please let me know. thnks!chris

Trying to replace an old casement handle that has stripped grooves inside. I measured and thought that 3/8" bore was correct and I purchased item 39-104. Unfortunately the bore seems slightly large for the male portion on the window. I am enclosing pictures of the old handle. Unfortunately I can't f ... (cont.)

I need 3 right window handles. I see no names but found numbers inside the casing handle cover and on the crank handle. Crank Handle: 11500-11 Pat. Pend Inside the cover: PAT NO D-198202 U S RD 1963 CAN R H

Hello, hoping you can help me match the crank handle for my windows. The house was built in 1952 with a small remodel in the 1970s. There are no markings on the cranks or windows except for a small number 1 on the crank handle. Please let me know if you need more information or photos. The main box ... (cont.)

I need a 3 1/2" handle for 1970s windows. 3/8" boar. I was looking at your product code 39-104. Is that 3 1/2"? If not, do you have what I need. I need 9 of them.

this is a 1955 metal window. Need cranks that will fit on to the regulator. Bronze color

We are restoring some metal casement windows and have the hardware pictured. We will need a couple of handles and some complete crank mechanisms. We have operator arms with two different manufacturers' marking: Getty and George B Henne & Co - both of Philadelphia. They seem to be interchangeable. ... (cont.)

HelloI am looking for a window clip and screw part along with a crank handle for the window - this os a "sun room " from the 70's . I semt pictured above . Thank youVivian

Hi I purchased 2 cranks. The only problem I have a wooden top that runs along the window still and the handles are to small. Can I purchase longer handles. Please let me know thank you

Does your site have pictures to mat h up type of handle

Could you give me a match for the window handels pictured? Thank you.