Viewing all customer Discussions for:

39-104 Handle with a 3/8" Gear Bore

The hole opening is 3/8

Need 3 right handle and 2 left. Do you have this type? See photo

Hi, I need to replace a window crank approximately 5 1/4 from left to right, the arm is approximately 8 inches when extended. Do you have a replacement? Picture attached. Thank you!

I recently purchased a handle with a 3/8" gear bore, part # 39-104. While it fits perfectly, it does not have a hinge so it can close. The current handle (39-104) is rigid and sticks out too far from the window when not in use. The customer service rep I spoke with suggested you likely have one w ... (cont.)

Looking for a non-folding crank for this 12-tooth spline. The narrow part of the spline (where there are no teeth) measures somewhere between 1/4" and 5/16" diameter, as measured with manual calipers. The wider base of the spline is about 3/8" diameter. There are 2 sets of teeth with a gap between, ... (cont.)

I have a project house built in 1978 using SEMCO awning windows and need a few crank handles. The interior spline/gear dimension appears to be 3/8" but the exterior entry to that is a bit larger like 7/16". Will this 39-104 work?

Need handles for multiple windows but don't know how to identify. They are R.o.w. Awning windows " the handle is imprinted with ROW on it, you will see faded in one of the pictures. Looks to be 3/8" opening. Any help would be very much appreciated

Piece missing on handle

Please help me open my windows....... I recently purchased a mobile home that has awning windows, they all worked perfectly until I decided to take down my old existing curtains and have plantation shutters installed. The shutter installer took off all the handles on the windows because they hit the ... (cont.)

The crank for one of the KK windows in my guest house is stripped. Can I get a new one (or two)?

I am trying to locate a new casing/cover for this flush mount crank. A friend stupidly left a candle burning on the window sill, melting part of the lower left side. I would like a replacement that hopefully just pops in.

The old handle is from an Eagle window made around April 2005. The old handle has a set screw to hold the handle in place. The set screw fits into a recess beyond the splines. The old actuator handle is 11/32", the depth of the 39-114L splines measures the same as the old handle and there is the sam ... (cont.)

This handle is stripped. It is on an old kitchen garden window with no manufacturer on it that I can find. There is an old label that is partially legible if that might help. Can you supply a replacement? Thank you Sherrill

I've attached three images of a window crank I need to replace (ridges inside have worn down). No identification markings on the handle itself or the window. Overall length of the handle is 3", and hole that attaches to the window is 3/8". Thanks!

Greetings! My name is Tina Trousdell. My house was built in 1989 and the whole house has Pam AM windows with 11500-11 Pam AM cranks. The right window crank broke several years ago on one of the larger ones. (photo attached of the left side of the same window). The number on the crank is 1150-11. In ... (cont.)

Hi, I am in need of 8 cranks for the old style aluminum windows. These fit on the end of a long metal shaft that extends outward from the window. Pls help! Thanks,Todd

I have several louvered crank out windows (awning windows?) on a sun porch that need new operators. There are no identifying marks or labels on either the windows or the operators. I have included two photos, one of the installation and one of just the operator. It appears from what I read this is ... (cont.)

I have two casement window hardware. I am missing handle on one. If I can get new handle great. If too dificult to get handle, I am glad to get two new systems. 11.5" from center of "crank box" to end of extension. I want somewhat same shape as there are custom screens made for this. Thanks!! ... (cont.)

Hello, I believe these are the original parts installed in 1960. Most of the cranks work, but the handles are missing. Can you tell what manufacturer I should be looking for? Thanks

I just sent a email. And I said it was more or a beige, but it looks nothing like your examples of beige. It is darker than what you call stone, bronze and clay and lighter than dark bronze. But since two are going in the garage and two in the laundry room matching perfectly isn't crucial. If it doe ... (cont.)