Viewing all customer Discussions for:

39-104 Handle with a 3/8" Gear Bore

I'm looking to find a match to this handle. On pictured 0862 it looks like the word "klein" is on the middle of the handle. The spline shown on picture 0864 is 7/16" dia. the other 2 pictures are dimensioned. The original handle is brass color.

Our house we built around 1975 or so. The front windows have wood casements and we need replacement crank handles. The pictures show the antique brass casement and handle. It looks like 39-114 is a match but we believe the bore/spline is 3/8" and not 11/32". Thoughts?

Looking for exact replacement for this dark brown window operator with a fixed crank handle and a 4 inch extension arm. If the extension arms are measured from center to center then it may be 3 5/8" I believe there were Tafco jalousie windows but not 100% sure.

Hello:We need to replace our window cranks on the sun porch. They are all breaking. The screw that has the splines on it are pulling out of the window crank body.This is the part number D-198202 RD 1963 CAN RH. Do you have replacement for this?Thank you for your help,Bill

I am looking for additional cranks for the crank out windows in a home I purchased recently. The spline is 3/8". Thank you, Jeanette

Hello, We are currently doing some updating to our home and instead of replacing our pills casement windows, we decided to refurbish them. Based on other threads I've read here, I've located the correct casement window crank but the window lock handle is still a tough one, Ive searched high and low ... (cont.)

Hi There. We've been told these are Pozzi Windows, 25 years old (1994). We need new crank handles on all 21 windows. Current ones are nicked up and swivel knobs broken off on many of them. Windows are still in great shape. Measures at 3/8" bore (not 11/32"). Window mechanism says "Entry Gard with a ... (cont.)

I have these windows throughout my home and am in need of new cranks. They were installed originally in 1982 or so. Please see pictures, I?m not sure which ones to order. I?m thinking I need a bunch of them so I don?t want to make a mistake ordering the incorrect cranks. Thank you so much, Kathi P. ... (cont.)

12 teeth are on the spindle on the operator and it has an allen set screw. 1960's vintage commercial aluminum windows.

I need to replace crank handle for old Patriot casement windows. Looks like the bore measures 3/8-inch, and the width of the handle is 3 inches There is a number "13" on the crank handle and it attaches to the operator NO. 30866. The color is taupe, but not too concerned if doesn't match ... (cont.)

Hi, We purchased a house built in 1959. I've been unable to identify the manufacturer of our windows (no etching or numbers that I can see). Several of the handles have broke (especially the little plastic knob on the end) and I am trying to locate replacements. I appreciate your help. ... (cont.)

The crank handle may match your part number 39-104 The weephole cover may match your part number 26-186 But the turnbutton screen clamp I could not find on your site

We don't know what brand of windows we have? We installed Plantation blinds and now we need to find 4inch extension's to operate the casement windows. Can you help?

Need to replace 2 casement window locks on a weathergard window. Also will need to replace a window crank or 2, and plastic cover (39-104; 39-107). Do you have locks for weathergard?

Viking window installed in 1993. The latch broke inside and we can't get the cover off to access inner workings. Contractor gave me the numbers 39-104 and 39-107 and I don't know if those are relevant. I assume the crank is still good but don't know how the two work together. Where can we find a re ... (cont.)

Will the 39-104 operator handle work on a Roto skylight with a 3/8 spline

Does this crank have a splined bore?

crank handle - looks like your 39-104

I just purchased the model 39-411 operator and am running into a few issues to use it a a replacement operator for my Marva windows: 1) The mount holes are too small. I had to enlarge them to 1/4" to allow the mounting screws to fit. 2) The arm is mounted on the wrong side of the lever. The arm ... (cont.)

I have casement windows with KK on cover. One of the handles is stripped. Attached is a photo of the handle with the approximate dimensions. It is gray color with a 3/8" bore hole and has a set screw. On the inside of the handle is stamped 9 45054