Viewing all customer Discussions for:

39-106 Stainless Steel Detach Clip

The attached photos are for an operator on a Marvin window that a Truth motor broke -- the crank was broken out of its socket. It has two 8-inch arms, and appears to be EntryGard brand.

I need to replace the whole mechanism, not just the crank handle. The house is almost 30 years old...any thoughts as to what I can purchase that would fit?

These photos are of a working casement window in my unit. I am using this window as a reference. Another identical window in the unit will not open because this sash-mounted track shoe / keeper is missing after glass replacement. The part I need is the metal sash track shoe that mounts to the bottom ... (cont.)

We are wanting to replace a few Marvin awning control arms. The part number is Truch Entry Gard 40761 . The windows were built in the year 2000.

Hi there, I was hoping someone could review the following and let me know which part would be appropriate for replacement. I broke the "spline" I think it's called on it when I over-cranked it to close the other night, so now it will open but it spins out of the casement when I try to close the wind ... (cont.)

The black plastic part that fits into the slide on the left interior side is broken. Needs to be replaced. Manufactured 7/15/1998.

Do you carry this detach pin for a Pozzi window. Also do you have the window with the frame around just the window. Or something that works for either? Window is 33 1/2 by 17 5/8"

Truth is the brand. #45002 is number stamped on the underside.operates an awning type window. If I new the tap size I could straighten out the threads so the auger stop would screw in. So I guess I gotta get the whole part.

Some of the clips or shows have fallen off our window arms. Do you have this style available for replacement?

Slide adapter from end of the actuator arms. Need adapter and retaining clipParts lost after having window AC in place of glass window.

Hi, I believe I need 39–348 based on the attached photos and the width of 24 inches. Two of the screws lineup roughly 2 inches apart, but I can't see the other two screws because they may be hidden by the arms. Can you confirm that they are about 4 1/4 inches apart? It also appears that I need ... (cont.)

Crank can open window but doesn't close window. Wondering whether any of your awning cranks would work.

Hi. I recently moved into a new place and several of the windows do not function properly. Some of the cranks do not function at all, some of them will open the window but will not close the window, most of them come apart when trying to use them. The handles themselves seem to be fine and the mecha ... (cont.)

Hello - I'm looking for some old Kolbe & Kolbe awning window parts. House was built in the early 90's. Need the guide bar track (1 @ 26 1/8" long and 1 @ 26 3/4" long) that screws to the bottom of the sash. Also need the brackets that slide in the guide bar track that clip to the arms. And... ... (cont.)

I've asked this before, but I wanted to verify with photos of the needed part.Susan

Entry Gard # 40759. Double arm. Installed unit appeared to have to have 'end caps' Missing. The part that engages the slide mechanism

Hello ~ I have a broken awning window for which I hope you can provide replacement parts. It is a WeatherShield 8204 Aluminum Clad Awning, installed in 2008. The window was yanked upward when partway open, twisting the operator arms and pulling the guide bar off the awning's interior wood frame. ... (cont.)

Need help finding replacement awning window assembly. When folded in the closed position arms measure 24 5/8 inches. Steven

I'm looking for the clip that holds the arm to the sash in this 1980s era window.

Can't tell if it's an Anderson or not