Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hello, I am looking for replacement part for my casement window crank operator. Attached are pictures. The measurements I have are as follows: 9.25" 4.5" 5.25" 3" arm with a bend

I have a Truth 40078 dual arm with a crank that is labeled 1(possibly I)2 45054. The operator has broken on the inside, so I believe my only option is to replace. I have a couple of items in my cart, that look close, but I was wondering if you had any suggestions.

The crank for one of the KK windows in my guest house is stripped. Can I get a new one (or two)?

This is mounted to the bottom center of my window. I have to remove a wood piece over this operator to remove it. The window is old but in great condition and I would like to keep it. The operator has the number 45002 on the bottom by the screw holes and 30897 on the arm parts.

Hello.. I need 2 left hand and 2 right hand.. rod is 15 inches

I have a broken operator. Photos attached. Can you match this?Tom

I have two right hand opening windows that cannot be opened with the crank because the mechanism does not work. Ithey are truth products

Not sure if the model Also white. Thank you

It says TRUTH on all the parts and there are the following part numbers on the unit: Base: 45251 Middle arm piece: 31850 Also, I can't take the cover off the crank so I think the one I need will have to have it attached.

Need to replace all of the parts (top and bottom) on 2 windows (left and right side)but having a difficult time determining the correct replacement parts. Truth 30905 is stamped on the bottom hinge on both the left and right sides. I would like to do the operator, hinge, link arms, stud bracket ... (cont.)

Need to replace several casement operators in the house. Is the pictured operator replacement a 39-031 or is it a 39-032 model? Thanks, Marty

Need two handles for this style operator. Bronze or brown in color. Item # please.

Need closer as shown in pics and two plastic crank mechanism covers for interior under handles. Need to clarify, the piece that screws onto the window frame is the part that is damaged. the rest of the closer is intact. The window piece is torqued so it will not attach to the metal arm where you fas ... (cont.)

351490 Where can I buy this part at? I believe these are the numbers.

Looking to replace all hardware for top and bottom of window I' am thinking 39-341 or 39-342 if inside it's the left window need screws to also handle Thank u Ray from Allshore home improvements

I need a replacement for this Operator. It is a single arm 13.5 inch and it latches on the left. I think it is similar to your model 39-013 but I'm not sure. It has 4 screw holes and the distance between the two top holes is ~3 inches. The slide the window moves on has the number 30744 and on the ba ... (cont.)

The dimensions on the latch are center of holes 2 1/2 inches apart they are threaded to accept screws the latch is 3/16 wide and sets in 5/8 inches. The dimensions on the crank are hole centers 5" apart, Threaded the short arm is 3 1/2" long and the long arm is 9 1/4 inches long

Can you help please ?

I need to replacements for 4251 / 31850 cranks.

This operator slips. The gear doesn't catch, so the handle spins without catching. I watched your video about replacing the operator, but I don't see how to get to the top screws, if there are any. If it's only screwed onto the sill outside, then I think I can remove it. The interior cover doesn ... (cont.)