Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I am looking for a replacement for this window crank.

It seams like the slpine my be broken on this operator. If I understand correctly the entire operator needs to be replaced. Can you help me idenfity the part? I will also need a cover. Thx

Opens left, there are numbers 20810 on one piece and 30744 on another (see pics) Unit is approx. 35 yrs old, and the crank screw is worn. Pic 3649 is best shot of whole unit. Randy Larzelere randylarz@gmail.com

I am in need of a casement window crank 3.5 inches long. The smallest size that I have seen listed is a 5 inch crank. I cannot find any numbers or information on the old crank or window to know exactly what I need.

if I can get away with it, I was just like to replace the rotary gear and handle. However, if I need to replace the whole awning operator, I will. The way that they have this installed I would have to remove the bottom sach of the window.. However, I'm not sure what part number this is. It could be ... (cont.)

Looking to replace both track and locking mechanism

I have a large window with 6 smaller windows framing it, 3 on each side. The six smaller windows are all awning type windows. One of the six has a broke crank housing - it does not conain the worm gear and it backs itself out when attempting to close the window. I am looking for a replacement window ... (cont.)

I need the snap stud bracket and the operator piece. Does handle come with new one? If you have any ideas for replacements I would appreciate it Thank you!

13 45054 thisw are the numbers listed on the part

I need to order 5 of the sets that are shown in the photo. I work for Agoura Sash & Door in Westlake Ca and need to know how to get this. Maybe start with a quote.

bottom left window lever arms and window sill plate on a crank style Windsor Window, 25.5"x49.5", IGCC @CBA, IGMAC CIG-2

Trying to replace this part no.

Is the hardware cover part no 39-107 as dimensions are same? Is sash lock part no 38-107 as dimensions are same? I can't find the crank. How do I measure spline dimension? thanks.

Need 3 left cranks and 3 right cranks, also can use the 6 gaskets for them also.

Hi, I am trying to see if you might have a replacement mechanism that will direct fit this existing mechanism. I am trying to repair 5 windows with the same failed mechanisms. I have measured all linkages and will provide whatever info may be needed. I really appreciate the help! ... (cont.)

Truth Hardware Dual-Arm Awning Operator, Center-Mount, 10.75" arms, Track-Slide (Pivot Shoe) connection I believe I have the above and need a replacement as the crank is slipping. Looking for the operator mechanism and a new crank.

The handle broke where it was attached and i believe i will need to replace the entire mechanism. I can not find any identification on the window.

Original window, 1979 house. Casement window, unknown brand. Inside thermopane reads Burton IGCG 140.... Crank handle insignia seems to be an r i? Or r with a head and shoulders.

Looking for this left hand casement window sliding hardware

It appears that the bushing collar has been removed or was destroyed. I need either a replacement bushing collar or a new operator