Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

What model would be a replacement for unit pictured. Available in White, Stainless Steel and Price. Is Track included? We need 42 pairs of replacement hinges. These are for Malta windows, and I measured 7" . Do you offer this size?

Do these come in different model numbers or is it a standard size? Hopi g to order the correct part the first time!

I am trying to find a replacement to this older operator. Please let me know if you have an alternative part

Broken crank assembly and cover on older Crestline casement hardware. I have 4 windows with the same parts that are worn (not yet broken). This window is approximately 28in x 32in.

The Truth operator (2 pieces) is broken. The casement windows were installed back in 1988-89 and finally broke. Please take a look at the photos and let me know if you have anything that may help. Feel free to call Steve if need to discuss. Thank you.

I need to replace 2 of these assemblies.

The whole part with handle

Note, the hinge is on top of this window.One arm number says 20810. Another arm says EntryGard TruthThank you (in advance) for your help identifying the model of this Truth window opener that I need to replace. The arms look fine, but the operator seems to be stripped. My guess is that this is an ... (cont.)

Window crank operator arm is 12" long from the bend to the end. Markings are Truth and 40051A, both on the arm.

Identical or functional equivalent. Arm is 13.5" Label on arm says "Truth". Sill opening is 4".

Either top bar, or bottom right pin broke off & left window hanging by the operator! #on left operator reads 20810. I don't know the brand. Figure I will replace them all, so I don't have to worry about them in the future (I am 64).

Not sure of the brand of the windows. Located in Michigan and 22 years old. We have 5 total with 4 acting up

Do you recognize the attached window opener? I need to replace a few that are broken and I'm having trouble locating them.

Hi there, I was hoping someone could review the following and let me know which part would be appropriate for replacement. I broke the "spline" I think it's called on it when I over-cranked it to close the other night, so now it will open but it spins out of the casement when I try to close the wind ... (cont.)

Hi there - I am not sure which replacement part(s) I need to fix the cranking issue. The crank works on closing the window, and only when the window is open a few inches (I push it out). The only info I was able to see are marked in the pictures attached. Please advise which part(s) I need to replac ... (cont.)

we have recently painted several windows in our home and are looking to replace the window, cranks and lever to match the newly painted color. The cranks say Pozzi on them, but also say truth on the underside thank you - liz

Need to find model numbers to order missing locks and cranks on casement windows. Windows were likely installed in 1993. Thank you,Ryan

Hi, What handles are compatible with this product: Product Code: 39-107 Thank you

several windows have bad hardware . the large spiral screw keeps coming out of the seat need help identifying the part

Can you help find the correct crank mechanism replacement for an older weather shield window? Thank you