Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

About 25 years old. Says Caradco on cover and Truth on inside of cover. Widest point of cover is 5" long. The stem (or whatever it is called) that turns the sprocket wheel just sort of corroded and crumbled.

When cranking window the gear shaft just comes right out because the ring around it that has a lot of fine lines does not stay in. I have tapped it in all the way. A Marvin window, casement, there is a number on crank mechanism 40471. Truth hardware.

Hello I am looking for a part number for crank handle and the actual operating arm per the attached pictures below. This is what it looks like without the cover.

Looking for I formation on replacements and costs for these as we have several that are stripped out and may need replacing.

Hello, I'm looking to replace both window cranks pictured in (2) attachments.Both are labeled as EntryGuard Truth. Left side has a part# 40887Right Side has a part# 31538.Let me know if you require any further info.Thanks,Joe

The only markings I see are Semco on the crank handle and EntryGard on the crank arm. Hope that is enough to match. Thanks!

The window will open, but the center piece comes loose when trying to close.

Looking for replacement part. 80 stamped on left side 06 stamped on right.

Hello, I am wondering if this is a swisco part? I dont see any other ID #s or brands. If it is discontinued what would be the closest match? Thanks

Hello - can someone help me find a replacement for this operator? I'm looking to replace it with a white one. Thanks

Hello,I have two winders and one lock for my windows I need to replace. The windows were installed at the same time around the mid-90s I think, but the two winders look different. Please let me know if you have any questions,Thanks,Aaron

These 2 pieces are part of a casement window. I believe that they mechanics are Truth. Can you point me to these two pieces. Thanks!

Hello, Trying to find replacement assemblies for 7 windows, six of which open to the side and one opens from the bottom. All are marked Norco. Other markings are Entry Guard and 20755. Most of them broke at the bottom of the piece that goes into the gears and attaches to the handle. They are from t ... (cont.)

Hi, I have attached photos of an operator on another window that works. We are trying to replace same type of operator but with left side opening window (photo attached as well) because the operator (left opening window) is frozen/rusted. Can you help me identify the part and related crank etc pl ... (cont.)

Hello Experts,I have 5 casement windows for which I would like to replace the operator (crank), arm and track. The arm has engraved on it "Entry Gard Truth".I am also looking to replace some weather stripping for the windows.Thank you very much.Andy

need 3 of these

I need a replacement crank gear for a 26" x 35" Cantilever window. I believe it's a Caradco window and it is marked "Entry Guard II Truth 20755". Thanks so much.

Looks like a 7" shaft and a center operating crank handle.Questions/ call

Do you have this replacement

I had a local lumber shop repair 2 windows. They lost some of the hardware I took in and said some of the other parts were unusable so basically I need everything to connect these 2 windows to their sashes. Some of the numbers I can make out on the similar but reverse orientation window are 20755 an ... (cont.)