Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Hi,I am looking for this part.My Name is Ghodi I have a glass shop in seattle.Best Regards Ghodi

The teeth to this part are stripped. I need to replace the entire crank and attached arms as pictured. The brand is "Truth" and the 2 numbers that are on the arm are: R30842 and 20755. Thanks, Nick

Will this part fit on this window opener? If not, can you provide a part that will fit this mechanism? Product Code: 39-375 Encore Truth Folding Handle with Cover

Hi! I need about 8 crank replacement parts for my casement wood windows (5 that swings to the right + 3 to the left). The windows (with double-pane glass) are original to the house when it was built in 1993. All of the handles are brown in color and some have "K/K" on the handles. The inside mechani ... (cont.)

looking for replacement regard, truth, dual arm mechanisms. Looking for replacement regard, truth, dual arm mechanisms. Small arm is 3 7/8 from pin to pin. need 1 left. 1 right

The window will open but act stripped when trying to close. What is the part number for this operator?

I think this may be a truth or true unit for an arm unit for a window.

found numbers ,20812, 31540 R

need part number for Caradco window that opens to the right that we replaced in August 2018

Best I can do is the enclosed picture. We have 2 the size of the one in the picture-that are opposite closures (approximately 33 1/2 inches. We have a total of 5 windows but I can't open any but the one above. The arm on the one above is approximately 10" on the part that says EntryGard TRUTHThe sm ... (cont.)

Looking for old new stock to repair this. The winder just goes around and around. It must be stripped. Can just that one small part be replaced or does the whole thing need to be replaced? These windows are from 1986. I believe these older ones are installed a little differently than the new ones, t ... (cont.)

Crank handle fell off the crankcase. I can still open the window if the handle is pushed back to the crankcase but cannot close window this way.

My windows crank handle has come "unscrewed." It will screw in and open, but when I turn it to close it comes unscrewed. Not sure if I need to replace the whole thing or if there's a way to get a new handle. I didn't know if it was factory pressed.

I am looking for a replacement for a left 20755 caradco window crank pictures included. Thanks

Hello, I have multiple original windows from my 2002 home where the crank arms are slipping out of the track and need replaced. The windows vary in size but all of them have similar hardware in the "Truth" brand. Hoping you could help ID a couple options. 1: Does the hardware need to be replaced exa ... (cont.)

I have TRUTH Entry Guard casement window operators. The part in question is stamped L30841. FROM THE INSIDE, the crank is on the lower Right. When turned, the window opes with the Left edge moving outward. I need a few new operators, but I want to start with just this one for now as I have no ex ... (cont.)

20755 rt arm cant open Left side to get numbers off arms. Part that handle goes into is stripped

The Worm screw has broken. Need to replace the full unit. Also need new slide that under the window need 2 of each part

Hello, I am looking for these specific crank arms for a couple of viking windows. Can y'all help?

My Window is not opening. I believe the window crank separated from the window. Which replacement crank should I purchase? Thank you.