Viewing all customer Discussions for:

39-171 Truth Hardware Dyad Operator

There is a number on the part 30905 word truth is also printed on part.

Seeking replacement operator and arm for 2011 Jeld-Wen awning window. The operator just spins.

Dear Swisco,Please see the photo of our casement window operator.In order #1009528, I ordered part #39-172, but the base with the holes for fastening it to the window frame is the wrong size. The order also included 2 parts #39-171 for other windows that need the operator replaced. The base for thos ... (cont.)

Looking for replacement casement window cranks. Thanks, Dean

Hi there I need to replace all of the parts for this bow window. I do not know the window manufacturer. The window lock has no part number on it. The crank mechanism has the numbers 30905 on it and the crank handles have the numbers 40083. I would need two left side of everything and two right side ... (cont.)

Please feel free to call me if you need i need to order parts as this is last one i have for a spare

I have a Greatlakes casement window with a crank opener. It is about 19 years old. The crank will open the window fine BUT when I go to close the window the crank just spins and won't close window. HELP

I am looking for replacements like the attached photos of weather shield casement operators. The single bar attached to the bottom of the window is 5

The patient is a 22 by 50 inch casement window with a Truth 45035-RH window crank. The window cranks open, but the threads holding the cranking screw in place are stripped and the window will not crank back in. the retainer nut turns and allows the cranking screw to walk out of the cast aluminum bod ... (cont.)

I am trying to find a replacement operator for an older weathershield casement.

I am looking for a replacement for Truth Concealed Sill Mounted Casement Operator 30972 which I understand is no longer manufactured. The dimensions of the two arms are 10" from end to end. The arm connected to the gear is 4 1/2" on center and the smaller arm is 4 5/8" on center. The base is 4 3/ ... (cont.)

I am looking for the attached window operator arm but in the left hand version. Do you have it or can you recommend anyone who might

The Truth arm operator work on all my windows, but handles on 3 of the 5 windows spin. The handle is made by weathershield in Medford Wisc. and it does not have a set screw on the bottom. Do you have this handle? Thank you, Mike F

I ordered hardware for crank window 39-172 and 39-171. All the size dimensions are the perfect size, but the swing arm is 5" and i need 4". With that being said the window wont close all the way now. So i looked on your website to find the correct dimensions and i can not find 4". The old hardware i ... (cont.)

Swisco, I have a casement/awning window that has a broken TRUTH operator. Attached are pictures of the part I am looking to replace. I understand the part is discontinued. Looking at the window from the outside, the hinge is on the left. Please suggest a direct replacement part/number/cost/avail ... (cont.)

Hi, I have a few Alcoa casement windows and one of the operators is missing and one of the locks is broken. Do you happen to have these parts? Thanks Jim

I am looking for a right hand split arm operator for vinyl casement Window installed in the early 1990s. Please see attached photos of the part installed.

Looking for a replacement for this operator for a 22" casement window. The baseplate has 3 screws aligned DIAGONALLY on each side of the arm. The distance between the 2 outside screws on the sill plate is 3 inches, center to center. The length of the swivel arm is 5 inches. It seems similar to t ... (cont.)

Hi, need one left side crank for a 15 year old Superseal Casement window. Showing other photos for illustration. The arms have since been replaced. Thanks

Do you have replacement parts for this window?