Viewing all customer Discussions for:

39-175 Sash Crank Operator, Pella

I have a customer with 6 pella windows and she needs all new hardware Hinges and the sash operators. The sash crank operators are part # 39-175 and 39-176. The arm connecting the hinge is 11". Do you guys have those or can I make the 10" or 12" ones work

Hi, I am looking for replace the window operator. can you help me identify it? This picture is of left hand but I am looking for the same with right hand.

Hi I need to replace the operators, plates, and cranks on my casement windows. Please take a look and let me know what parts would work best for me. Thank you in advance for your response!

Do you have this part?

Our recently purchased home was built in 1971 and has the original Pella casement windows. The cranks all seem to be stripped and I can't seem to find working replacements. The part number on the crank is X-429. Ideally we would be able to get "T" cranks so that we can close our plantation shutte ... (cont.)

Dear Sir/Madame, Have an older model Pella casement window that is in need of a new operator. Attached are pics and lengths of some of the parts to see if you have this one.

would a the length of the arm effect the window operation,like properly closing etc. We have the the crank operator with the long arm #39-175 , would the operator#39-097 work just as well, its less money.

I am looking for the arm that connects to the window

How do I get the sash crank out of an installed window? I have a crank assembly that is broken and it is not obvious how to get it out without taking the entire window assembly out. Please tell me that is not necessary! Mark

What is the difference between 39-096-7 and 39-175-6? Dimensions are the same. We need the crank on the left window in kitchen. The right was replaced by window repairman two years ago. The windows (which open outward) are more than ten years old. Sal

My crank mechanism seems very similar to part 39-097 except the bracket that attaches to the window itself does not match dimensions in photo on your website. The base with gear mechanism and the arms all seem to be same dimensions as listed in on line photo.

Lots of terminology floating around on the posts, so I want to ensure that I order the correct part. The interlock mechanism that attaches the crank arm to the gear broke, so I think that I only need a crank and not the crank plus the arm. Which part number is this? Can I buy just the correct crank? ... (cont.)

I need all hardware to fix theses windows.please help identify. thanks, Todd

This is to a casement window that was installed in 1989. The window opens to the right.

What's the difference between product code 39-097 and 39-175 that warrants doubling the price? Unfortunately I think I require product 39-175, but the only difference I see is the dimension of the piece that screws to the window. Am I missing something?

The cranks have Pella brand handles. I have one opener that is broken. Hopefully you can help figure out the right replacement parts. Thanks

I need the cranks for the window. The house was built in 1974. This is a wood window. The shaft is 3/4" tall. Width is 5/16", not including the teeth. No markings were found on the window.

the operator arms are 4 1/2" from the wood frame to the joint and the other piece is 5 11/16. The restraining arm is 7". I need this hardware and anything else you would recommend for one left hand window and one right hand.

FYI this is the opposite of the one I need homeowner threw out operator for left window. Please Help, THANK YOU!! Robert

Hi! I bought from you a pella window crank 39-097.But my problem is the new arm is not the same as mine.I send 3 pics with my email.Do you have a part like my old one? Regards! ERIC