Viewing all customer Discussions for:

39-175 Sash Crank Operator, Pella

Hello, Are you able to help me replace the operator on an older Pella window? The photos attached are for the left window, I need the operator for the opposite, right window. I also need the wood molding cover. It's 31 1/4" Long. The sash size for reference is approximately 33 1/2" W x 56" H I a ... (cont.)

I need to replace the casement hardware on for sashes they oppose each other so it would be two left hand and two right hand and also need new crank handles for both.

?????

Window will not open. Have tried other crank handles. I have two Citation doors slinging 4foot doors. Handles and locks are oldd and I'm having trouble with them. Also need 4new crank handles for windows

Cant find brand of this window. Looking for operator. Thanks !

I need the plastic slide located at bottom of my Roto casement window. The slide travels along the bottom as the window is cranked open. Is this part available? Thanks, Ken

I need 2 of these that hinge on the left and open to left when looking out of the house and 1 that hinges on the right and opens to the right. Both handles are silver colored. Windows are Pella from 1994 Long straight arm is approx 11.5" Straight arm from window to bent arm is approx 5-5/8" End of b ... (cont.)

Please view the attached photo and let me know what you recommend. Larry

I need the whole window control crank with. Double arms it's a pella Window which was installed in 78

I did not see precisely similar parts on Swisco's Pella page(s).I need what appears to be the white plastic (perhaps nylon) toothed glide and the double wheeled roller on which the sash rests. If it's needed, the sash glazing measures 29-1/4"x41-1/4". Mike

Which is your part # for this pella operator? Pella's part # is 0B1V0001 LH The window is stuck closed & can not be opened. Going to buy an operator in case it breaks once opened. Thank you

I need 2 Pella window closers for a job. They are older Pella pro windows.

This is a picture of the roto operator I need. The one next to this one the shaft the crank fits on has broken off.

can I replace Pella operator 29-175 with 39-096 as they look the same length if you add the last small piece that is to be screwed to the window

cranks are stripped. Do you need additional photos?

Please see attached pictures. Pella windows were manufactured in 1974 per numbers found on sill, 704CC. Three of the four crank handles no longer work; however, one of the original cranks (stamped #4 on top, X-429 on bottom)fits and works flawlessly over the shaft/spline. Pella sent me two different ... (cont.)

looking to replace these operators, I Need 2 left and 2 right

I have a customer looking for this operator does Swisco have it?

Some of my Pella windows don't crank open anymore and I need to replace the whole mechanism, not just the handle. These windows are from the early 70s. Please help me in identifying what I need to purchase to replace. Thank you!

I need to replace the Hinge arm on my Pella casement window. It is about 4" long with 2 small wheels at the end with white plastic "teeth" attached to them.