Viewing all customer Discussions for:

39-175 Sash Crank Operator, Pella

need replacement roto operator and hinge arm supports with the shoes It is a LH hinge from the inside long side is 12 3/4 x 9 1/2

Hi, Hoping you can help - here is a picture. These are probably from 1973 or so. I will be replacing 12 operators throughout the house, and I can change them out to anything equivalent. The window width is 16 inches. I haven't removed any yet. If you need more info, please let me know and tell ... (cont.)

Looking for replacements. Have RH and LH swing. Stamped on arm is "W.L."

At a loss for solutions but willing to adapt an operator to replace ours, which is a 1967-1993 model, a Left (window opens left to right) operator. Wondering what the measurements for a 39-391 operator might be. The arm from the center of the pivot for the gears to the center of the rivet at the end ... (cont.)

Can you please help me with this parts I need. Thanks

Hi, I have old cranks that have lost their ability to completely close the casement window. Can I replace them with a different model crank? The windows are 30" and 24" wide wood frames.

Hello Gentlemen-We are looking to replace a crankset operating box and wing handle from a vintage Pella casement window. The unit is single glazed with a storm panel.It is a left hand swing as viewed from the interior.The existing crankset has a sheared off handle post.Mark

I need to ID and get pricing on a set of left/right handed crank assemblies for my Pella casement windows.

the only numbers on this crank is a # 1 with a circle around the 1.

Year 1985

Hi, need this gear replacement. Pella Casment window. " Pella 1 691 " is the code on the glass. Please let me know if the pics and the info are enough. the gear has come apart and no longer operates, or at least barely. If I need to go and remove the gear from the unit and get better picture ... (cont.)

I'm interested in this part for my early 1980's Pella crank our window. Is this the correct part I would need for a window that cracks out right but from the outside is on the left? https://www.swisco.com/Pella-Window-Crank/pd/Casement-Window-Replacement-Operators/39-096Also, am I able to pick this ... (cont.)

I have Pella Casement windows. They don't close properly without me pushing them closed. I've determined that they have the Pella roto opener (1967-1993). The openers are quite expensive, and don't seem to have any adjustments. But I'm wondering about the support arms that aren't attached to the ope ... (cont.)

Operator moves well except final closing motion, the tang on the arm and the catch at the end of the hardware piece mounted on the window collide. There is a fair bit of play in the operator, seemingly around the rivet on which the main crank gear pivots. There is also several mm of vertical play ... (cont.)

Can't seem to find anything that is close to this operator. The house is from the 1965.

I can't find the Manufacturer's name of this window. The first set of pictures is of the lock and the second set is of the cranking mechanism. I would need multiple parts of each. Thanks!

No visible markings on crank or window and experts cannot identify manufacturer. The house was built in the 60's and we want to see if anyone can help us find this product.

I have pella windows from the late 70s to the early 80s. I Need parts for one window to completely operate also I'm needing a Mortise lock

Need wood casing and awning operator. Thanks,Lee

For a casement style window