Viewing all customer Discussions for:

39-194 RH Window Crank Operator, 3/8" Hole

I need to replace this part wich open the window by crank the lever If you have the part let me know Thank you

In the picture: TNO 198202 USA RH RD 1963 CAN

I would like how buy tosse part

Needing a replacement for my current operators

Hello I'm looking for a new awning operator can you please tell me which one I need.

Hello, I have old metal windows that are in desperate need of parts. I've checked the windows for names or markings but can't see anything at all. I am enclosing photos of them. Please let me know if you need any additional photos or information to help me place the order for the cranks and also fo ... (cont.)

Looking to replace this crank as I believe it stripped. The hole that connects to the window is 3/8" in diameter. The arm with the hole that connects to the window is 3" long. The two screw holes on the bottom are 1 3/8" apart center to center. The top screw hole to the bottom is about 5 3/16" cent ... (cont.)

There are no marking on the cranks. This Florida house was built in 1967. I believe the hole is 3/8 of an inch wide but there is only one hole at top and two at bottom. I believe that the arm length is 2 and 1/2 inches. The handle came right out of the crank casing hole and I cannot get it to sta ... (cont.)

Hope you guys can help with this I need a replacement, Thanks

The crank handle has disengaged from the lever controlling the opening louvers. It looks like pin has sheared off. Also plastic clips have become brittle and broken off. Rubber seals have hardened and become ineffective. Basically a renovation job which I can do is now in order as long as I get the ... (cont.)

There are no numbers on the crank but the window had a sticker that said Lawson Industries, Inc. ATW-1161 awning windows.

Can you please help me identify the replacement part for this item I have many that I would like to change out.

Your part: RH Window Crank Operator, 3/8" Hole Product Code: 39-194 Looks like a match, but the old one has a C-clip on the operator's arm where it connects to the torque arm. Any thoughts?

Hoping you can match this. Holes top to bottom is 5 1/4" Hole gap at bottom is 1 7/16" Hole gap in connecting bracket is 2 1/4" There is an offset in the connecting bracket toward the inside. Handle says Stanley but none of the other handles on similar windows say anything. I can't find a mfg name ... (cont.)

I need to o replace window crank for this old aluminum window. Help me, please, pick up the right window crank from your store. Thank you. Natalia

Hi looking for this specific item tried hardware store all are a little different then mine. The extender that comes out is bent inward about 1.5 in from where it connects to the crank spindle arm. If you can help me find this part I would greatly appreciate it.

I would like to replace three easement window hardware in brown. The windows were part of a Four Season Sunroom. The body measures five inches and screw holes are 5.5 " apart.Please identify this part so I may place an orderThank you,Morris

I've been having trouble finding a window operator at my local Home Depot or Lowe's. It is a PAT. NO. D-198, 202 U.8 RD. 1963 CAN.

Do you have this operator?

39-193 LH or 39-194 RH?See attached photo. The defective operators for which I would like to order replacements are installed on the left side of three-pane jalousie windows. The vertically spaced screw holes measure 5.25"CTC and the horizontally spaced ones measure 1.375". The link arm measures 2.2 ... (cont.)