Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

I purchased a house from a bank that came with... well, missing some parts. I'd like to be able to open my manual skylights, but I only see splines pointing at me. As you can see, I think these can use your 11/32" universal parts, but I wanted to ask first.

I need a replacement handle for this Silverline Pivot Out Egress Window. This handle snaps open to crank and folds in for storage. I removed the broken handle from the shaft. The shat is not a hex rather a multi tooth .25 inside diameter and a .314 outside diameter. Thanks for your help. ... (cont.)

I have a semco casement window with a broken crank. Upon further examination I noticed that the hardware said Truth Entry Guard 30744 on one of the pieces. This window is the left window when looking from the outside. It seems to me that the replacement part may be EntryGard Dual Arm Operator 39-031 ... (cont.)

So to be sure a crank handle will fit my operator, how would I measure the spline? The spline is like a gear shape, so is it a diameter from peak to peak?

Here is a picture of the numbers from the handle I have today, it goes with a Truth crank for my ROW window. Wondering if there is a folding handle that will work that will limit issues with blinds etc. The circle is 3/8 where handle attaches, the stem is 11/32 with 12 teeth. Thanks. ... (cont.)

I'm looking to order a silverline folding handle part # 07-OP05-7811-03

They are truth window cranks, looking for 2 rights and 2 lefts. They are 13 1/2 inch ,do you have and how much.

frontwindow and bay window

Hi, My current casement windows (wood) have crank handles that project out. I would like to know if there is a replacement folding crank handle if necessary the operator so the handle is out of the way of window treatments.

I think that part I need is 39-035. Hope you can identify it with attached photos. Thanks Dmitry Patent

The arm says...Entry Guard, then there is a picture of a house on it and then the word TRUTH is on it and is underlined. There is also a number that is 20810. The frame of the window is wood and I believe that they are original from the 1970's

Hello. I need a replacement for this Truth casement window operator. It is a dual arm and probably was manufactured around 1990. I looked at the Truth web site and the closest there is the Entrygard Dual Arm operator. But the gear for the smaller hinged arm for my part is not located in the same pl ... (cont.)

Is this Truth folding Handle + cover kit compatible with the 39-013 and 39-014 operators? I need about 40 of such operators and want to find a compatible handle for them. I am thinking of getting the Crank handle (39-114L) but if this part is compatible with the operators it will be a bonus for ... (cont.)

Do You carry these pieces thank you Daniel Lombardo

Hi - I'm looking for: 2 hand cranks, 1 plastic case and 1 "gear" which attaches to the window crank. The gear is in picture 3. Thanks in advance.

Hi, I need to find replacement parts for two vinyl crank style windows. I need a replacement crank handle and two locking mechanisms. I believe the manufacture is Empire Windows (Now Cascade Windows?). I attached an overall picture and a close up of the sticker. Thanks!

Swisco Company Attached are pictures and measurements of the casement window operators we want to replace. What is the order part number for both left and right units. Does the handle come with it or is it separate. I see the words WRIGHT and Del Mar Toranto and numbers 07868 and either 07900 ... (cont.)

I have a large casement windows that need to be repaired. the cranks needs to be replaced (left and right) as well as the left track. The serial number is 07701-00 R/H (this is the unit I need the track for. I also need to replace the track for that crank. Both cranks are missing the wheel th ... (cont.)

OP05-7504-00 identifier stamped on base of operator with 11/13/03 and 17:27:33. Thought to be a Roto product. Seeking supplier and current product order numbers for operator with white hood cover and handle (white).

Operator arm is 10 1/4" long. What replacement operator parts will work in place of this old broken one?