Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Hello I need the whole part that sits on window sill and the parts that attach to the window and the crank.

Hi! Will this work with an Anderson window opener? Here's the piece attached.

I have a project house built in 1978 using SEMCO awning windows and need a few crank handles. The interior spline/gear dimension appears to be 3/8" but the exterior entry to that is a bit larger like 7/16". Will this 39-104 work?

I'd like to replace our old Truth cranks with these folding handled cranks. In this image, it looks "left" oriented, can it be installed facing "right" as well, or is there another part that faces right?

These are the window operators we have throughout our whole house. We need basically all of them replaced. Brand name is Truth. We have both right and left swing pairs of windows. Would be interested in a black finish vs the brass.

I am looking to replace the chipped "housing" and crank handle for my casement windows. The windows open and close ok. But the housing is beaten up and the teeth that hold the handle are shot so the handle sometimes slips when trying to open the casement. I am not sure how much I need to replace ... (cont.)

I'm trying to replace the handle that came loose from the "anchor mechanism". I'm not sure that's it's Milgard - but pretty sure it is.

As requested please see attached.ThanksHaresh

Handle replacement.

Wright casement window circa 1989 with the numbers 8788 on the arm. Need arm and related parts

The back bar measures 21-1/2" as the one you offer. Will the Norco crank fit your replacement or do we need a new one?

Hello, I'd appreciate your help in identifying a broken window operator mechanism. It's a Truth Hardware piece. The long arm is 9.44" long and the short hand with the joint is 8" long. I'd appreciate it if you sent me a link to purchase a compatible window operator. Thanks, Lee

I don't have any more info other that they are truth windows

Need to replace the whole crank assembly...american craftsman windows I believe

The crank is manufactured by Truth. The window is a Marvin Integrity window. Both are original and installed around 2004. The gear is not working correctly so need to replace.

Need to replace folding handle and part that attaches to window. Theres a number on the bar and handle but not sure which replacement piece to get. Thanks

I am looking to replace both of the operators on my casement windows. One the gear units has completely strip and the other, I am sure, will be right behind it. The brand is Entry Guard. On the major arm there is a number 40754, on the minor 31538A, there is a 3rd number 20810A. On the base of the g ... (cont.)

I need 5 of these window cranks or a replacement

Looking for the following parts 3- left crank assemblies Set screw for a crank handle I have the flowing part # 30847R 30841L 31229 I also need one arm that goes from the Stud bracket and the window. All windows are 12" wide the cover for the crank is 5 1/4" wide. Color not sure but bronze or brown ... (cont.)

13 45054 is on the handle of this Clausen window handle. The large opening on the handle measures 11/16 and the smaller on the handle itself is 6/16 of an inch. I also need the base that the handle fits in. Thank you!