Viewing all customer Discussions for:

39-280 RH Awning Operator, 3/8" Hole

Looking for replacement window cranks for Aluminum Louvered Windows. I found a number on the inside of the window crank: 4714-B R. Please let me know if you have the replacement part. Thanks, Mike Y

Looking for replacement window mechanisms for the windows I

We need two of these, there are two mounting screws at top and 2 at bottom. It's 6 inches tall and an inch wide at the widest part.

Hello, Your model #39-026 Has almost all the correct measurements except one. The top hole is not one but two holes spaced 7/16" on center line apart. Starting from the spline side first hole is 3/16 from edge to center of hole than 7/16 from center of 1st hole to the second hole center. Thank ... (cont.)

Hi, Our house was built in 1966. We have a 3-seasons porch and one of the window cranks is totally broken. I have included photos of what the broken one looks like and what a fully functioning assembled crank looks like. The arms that open and close the windows seem to be fine. And the crank is ... (cont.)

Hello, I have to replace several dozen cranks, and am unsure which is the correct Pan Am crank. I've included several photos, if that is of use

I am attaching photos and a sketch with measurements of a Jalousie Window Operator like the ones installed on a house in Christiansted, St. Croix, US Virgin Islands. I need to know if you have a replacement model for this and I need a quantity of four (4) units. I also need to know if you can s ... (cont.)

The house was built in 1962 Ovarall length is 5.7" Overall length of arm is 2.65" Size of holes is .2 " No markings found

Hello, I am trying to locate replacement window operators for some awning windows. I am attaching a picture of one. Here are the dimensions: span of two top holes = 7/16", span of two bottom holes = 1-1/8", span from top to bottom holes = 5-1/4", span of linkage 2-1/4" and the link hole diameter ... (cont.)