Viewing all customer Discussions for:

40-049 Complete Mortise Lockset, Brass

Emtek 322 was written on the side of the key. It's a cole Sewell product.

Howdy, Swisco- I want to replace the strike plate as the brass appearance is kinda beat up, about 20 years old. I need 2 of them. The screen door itself is a Eternity, made by Emtek, and the latch I think was called Infinity. Please see attached pictures. In the second picture I prov ... (cont.)

Looking for a replacement storm door handleset in brass finish. Door is Emco Forever View (approx. 20 years old.

Just replaced my PADO storm door mortise lock with a 40-049 Swisco lockset. Perfect fit, great quality and all the holes lined up. This was a very pleasant surprise as I fully expected that modifications would be needed. Thanks Swisco.

Brass Handle Set for a Larson model 224-FL storm door their part number is 202394

Interior Lock Knob will turn but mechanism does not unlock door. Door was installed prior to home ownership so I don't have an exterior key. Cannot enter or exit door due to permanently locked. How do I repair lock mechanism or purchase new parts or the entire unit? Thanks much.

I'm going out of town for an extended stay, and I need to fix my door lock. DO you have this?

Hi - I'm looking for an Emtek #322 door handle replacement assembly or part. The part that broke is the "rocker" (for lack of better words - see attached picture) to the latch. If that is not sold separately, then I'll have to buy the complete assembly. So, can you assist me? I look forward ... (cont.)

I am looking for a replacement of a Rebco balcony door mortise lock set for my contractor to install. He has tried a number of off the shelf mortise lock sets from Home depot, which did not fit in one way or the other. I'm looking at your 40-049. I have double checked the dimensions of the faceplate ... (cont.)

I would like to know if I can find a replacement door lock for this door.

Need to replace the entire latch assembly on Sewell storm door.

Pella tells me they no longer supply the hardware for this door. I did not have the old hardware to photograph, so I am sending the next best thing...the schematic/drawing from the original installation instructions with an exploded view on Step 5. I do have the strike plate which measures 8 1/2" lo ... (cont.)

Hi, I am trying to replace the door nob/handle for my storm door. I was able to take pictures of the door nob and attached you will see the reference number found on my door. Can you please tell me where i can find the replacement piece or the link to purchase this online? Thanks, ... (cont.)

Hello, My name is Melissa and I was wondering if you could help me with something. I am looking for something that will fit my storm door. I attached some pictures so you can see what I am talking about. Thank you, Melissa

I am trying to find a replacement handle for my storm door. Any help you could provide would be greatly appreciated. Thanks Curtis

The mounting holes and width of my mounting plates do not match the measurements you display online. Also, we have a key from both sides which you do not show (this is not a show stopper). Thanks, Rob

Cole Sewell #07029794534 307 marked on the storm door EMTEK 322

Hello, From reading the other threads, my understanding is my PADO LATAO lock is discontinued and the 40-049 appears to be the best replacement. However, I'm unsure what measurements are the most important and whether you think I will need to drill holes or modify the 40-049 in any way. Attached ar ... (cont.)

I am searching for a pb mortise storm door lock, similar to the one you advertise (40-049). The lock handle is on the left side of the door. I think the item number is s843342 maybe. I need the complete mortise lockset brass (4o-183). The specifications are as listed on your advertisement. 8 1/8 " l ... (cont.)

just the lock cylinder