Viewing all customer Discussions for:

40-138 1-3/4" Tulip Knob Latch

Need a total replacement

The handle snapped off and need a replacement of the interior handle for this cmech handle. Do you have anything compatible?

I have ordered from swissco before I am hoping you can help me again. I need three replacement parts- 1 for a white screen door and 2 for 2 separate sliders.

Its for a side mesh patio door lock that just locks from the inside

I need to replace the door handle on my storm door. Screw broke on top screw holder. I would prefer not to have to replace entire door. It was gold but I spray painted it white.Door sticker shows the following info: Cole Sewell reg# 06119694782 157

Hi, looking for replacement latch for metal outer door.1" wide door3.5" mounting holes, with center spindle hole about 3/4" above lower mount.Don't need the bolt, just looking for something to latch as it shuts. Already have a deadbolt with key installed above this latch.Style not a big issue, but ... (cont.)

Hi - I think I have an old screen door handle set that looks roughly like a 40-042 (first picture). I just installed a Kwikset smartlock deadbolt, and I discovered that the internal screen door handle rests on the "lock" button of the smartlock keypad (second picture). I need to raise the screen do ... (cont.)

Do you have this handle for my screen door?

Need the latch to be 1 and 1/4 inch backset instead of 1 and 3/4

Our storm door is 1 3/8 thick with a broken Bayport handle (1 3/4" hole spacing). Is this a good replacement?

I would like to have a replacement for this mortise storm door handle . The screws on the face plate are 3-1/2" apart,the face plate is 4-1/2" long, the back set is one inch. Any help with this would be greatly appreciated

I have an old porch enclosure that the door handle has broken. I am trying to replace it. Attached are pictures of the broken handle and a complete one from the other side of the enclosure. Thank you for your help

The replacement is for a Cole Sewell storm door Would this be a good replacement?

I have a Chamber Storm Door (model 62LBEL332WH). The door handle broke and I the one's at my local big box only fit doors up to 1 3/8" thick. Our door is 1 3/4" thick. Chamber Storm customer services tells me that the original hardware has been discontinued, but they can replace with a brass handle ... (cont.)

can this handle be ordered in bronze ?

The handle that I need is identical to your part # 40-138. However, the thickness is for a door not 1 5/8" it's for a thinner door. How can I get a handle like 40-138 for a 1 5/8" thick door? Need to hear from you a.s.a.p. Mark

Hello, I need a new knob for my storm door lock as the spring is worn after many years and it does not return the inside handle to horizontal for proper engagement with the keeper. It was an Ideal Security from 1987 supplied by Hess Armaclad in Quincy, PA.. It was included in what I believe was th ... (cont.)

What is the length of the latch and does it come in black and what is the width at the top? Thanks.

What is the size of the square key hole? I need a knob similar to picture only with a 1/4" square hole. Can you help?

Any chance you have this lock set or one that functions with the same jam? I have not seen this on any inventories but thought I'd take a shot and sent pics. The spring is inside the knob. That centering spring is worn out as is most of the rest of this latch. Let me know if you have this set ... (cont.)