Viewing all customer Discussions for:

55-034 6' Guide Runner, White

Hi after a lot of research, I've determined that this tiny part is crucial to function of my existing windows. Removing one broke the piece. Thanks for your help

I am missing many of these "spacers" do you have a similar product?

From norco awning windows aluminum clad double pane. Wood interior frames. Thought to be 1986-1987 construction Need 400-500 feet of stripping Need in brown if available. Thank you for you time

I am looking for these guides, four per window. About 1/2 inch long and 3/8 inch wide. The clip on in small indents on the window.

Good morning Swisco.I have need of 4 window balances and have no ID on the old ones.They are 26 and ½ inch long ( Metal only ) The clip on the window is in the middle and not on top. The sash weighs 9.5 pounds.The pictures will tell you the top and bottom pieces.Please let me know if you can accommo ... (cont.)

I think I?ve identified I need S380-34. Eveything seems to look good. You?ll notice in one of the photos, there?s a stamped 3320U BSI, However my window weighs 22 pounds. There?s also a picture of weather stripping but didn?t see that on your site. Do you have that or know where I can get it? Th ... (cont.)

In order to replace window sash in window opening this trim is in the way and it is damage. I need to buy it

Window aluminum frame has cut outs as shown in above pictures. Top window frame has NO place for take out clips. Channel balance that I need is S390-21 option 2040 Is there another part that goes into the Cut Out section of the window frame? Thank you.

I need 5-29x2 And 1-20x2

I have 1997 Milgard single hung windows. I am looking for a part that I would call a sash glide or spacer. They clip on the sides of the sash to keep the window tight in the frame as it slides up and down. Tiny, plastic or nylon, about 1/2" high. I need several. Surely must be a common replacem ... (cont.)

I don't see any readable markings, numbers or names on existing hardware.

Hello, could please tell me what type of door the 6'guide runner code 55-034 fits. I think I have a Emco or a grishom.

Hi, I need sash guides for a number of my windows. Would you have this kind as shown on the images I sent? Thank you. Regards, Roberto

Hi, I need wool pile weather stripping. The size I measured from my sample is 6/32" x6/32" which I can't locate on your selection of Wool piles. Please guide me on what size to order. Thank you. Sincere Regards, Roberto

I'm trying to identify the snap-in glazing from some older storm windows without any apparent markings. It somewhat resembles 55-076 in profile, but the dimensions are smaller. An identification or suggestions for a compatible replacement would be appreciated.

Hello! In the past I searched for Rollyson parts and had given up hope and figured replacement windows will just need to be in my near-future plans anyway, so I would just live with the problem windows for the time being. After a long spell of living with malfunctioning and drafty windows I decided ... (cont.)

We have a 20 year old Ryan (NVR) home with aluminum Rollyson windows with internal muttons.. We are hoping to find a way to fix this window to prevent replacing the whole house since a match would be unlikely. Our most frequently opened window in our family room has just lost a part that beg ... (cont.)

Thanks for helping me to identify the ordeing part. The "shim" between sash and jamb ob both sides was torn. The long section (front) is 5/16", short section(back) is 3/13; and the gap to inser into the sash is 1/16". Please advise the SWISCO order nukber. Thanks. LIN

Need this plastic channel for old Crossly window sashes. There's one on each side of the sash to help in gliding. Please pics. Thanks.