Viewing all customer Discussions for:

55-080 3' Snap-in

Hello...thank you for taking the time to help me identify this glazing. There are no markings at all, and the house is approximately 23 years old. I have attached two pictures- one with the actual material and dimensions, and the other with where it was removed. I have about 7 windows I need to repl ... (cont.)

One size is 5/8 longer size is 3/4

Please see attached photos of glazing for our Alenco dual pane single hung windows. The glazing has cracked on several windows so we would like to replace before putting the house on the market.

Need to know what to replace this window trim with. Measures approx 1/2" on the outward facing side and 11/16" that goes between the frame and window. There's a 1/16" channel on the bigger side that appears to hook it in. Color is beige or white. Things have been on the windows for about 15 years an ... (cont.)

House was built in 1994, I assume they are the original windows, but not sure. They are Alenco windows. no other stickers or labels I can find.

I'm looking for that beading in tan....its for a vinyl window

The measurement for each side is 1/2 inch. One side (without the tab) is slightly curved. The side with the tab is flat.

I am trying to identify this glazing bead to see if you have any thing that matches. I believe it is for an Alenco Vinyl SH Window. Any Help would be greatly appreciated.

I need this aluminum glazing bead to reglaze an 5/8 oa igu in a wood sash. the part of the glazing bead that goes into the sash and rests between the edge of glass and wood (the long flat part that is sandwiched between glass and wood) is approx 3/4''. the part that is folded over and snaps into th ... (cont.)

Do you have this glazing bead?

This bead is used to hold in a 7/8" IG, aluminum frame window. Tried to use a similar and slightly smaller bead but it rolls behind the glass. It measures 1x3/4.

Hello Trying to find the attached window glaze. Each side is 1/2 inch. Thanks

Hi, I am looking for glazing bead for a vinyl picture window. I could not find a manufacturers name or any identifying marks on it. Hopefully the pictures will help. The glazing bead acts as a spacer between the window and the frame. The part with the hole in it is the part that sits in between the ... (cont.)

it measures 1/2inx1/2in with a lip at the corner about a little less than a 1/8 down.

I believe this is from a Champion 3050 window

looking for glazing bead v434 for Alenco windows see picture

I am renovating a house with old double pane windows that has snap-in glazing. I have no idea who the manufacturer is. One of the windows has deteriorated, cracked glazing that I need to replace. I have attached pictures. The measurements are approximate as the part is warped. I can tell when r ... (cont.)

I have Danvid, double pane windows. Model number is unknown. Need vinyl glazing strips. Please see attached photos and drawing. Color is gray. Rex O

Hello, I've got a few pieces of cracked snap in glazing off my windows. Beyond seeing Alenco hardware on the windows, I haven't a clue who made them. I'd like to order replacement snap in glazing if you can identify the proper replacement for me. Thanks! Jason

They are just an L shape with a hook lip on the very edge on the insert end At least 30 yr old.