Viewing all customer Discussions for:

90-300 Face Mount Keeper & Sash Lock, 2-1/4"

Vinyl window need lock 2 1/4 hole to hole.

I am trying to find replacement parts for the window latch and lock pictured. I cannot find markings on either the parts or the windows. The windows are at least 20 years old.

Update we took it apart for better identification we have tilt windows and need replacement parts

Hello: Please help me identify the correct part numbers for the Windows lock and pivot bar so I can make the purchase from your website. Thank you

One of my sweep latches has a broken spring and needs replacing. The screw offsets are 2 1/4" with a 3/8" backset. The keeper is 1.424" x 1.628" with 3 mounting holes (only two used). There is a part # on the keeper, #677147. Your part #90-180 looks close, but I can't tell if the cam will fit the ke ... (cont.)

I am trying to purchase replacement locks for my windows, but cannot locate a direct replacement so far.Please find attached photos to see if you can help. There are no markings on the fittings that I can find. Thank you.

Please determine which window latches I need from your inventory thank you Joe

Old single hungs approx 15 years Ordered from Jeld Wen but their replacement screw holes are approx 1/8" off....

(Qty - Item) 1 - Window Sash lock 2 1/4" 2 - Pivot Shoe L 1 3/16" X H 1 5/16 X W 1/2" 2 - Tandem Coil Balance 7 & 9 7/16" band width The window sash is identical to your #90-305 but need it at 2 1/4" hole to hole.

I need latches for 3 windows. The attached photos show the only markings on the windows.

Home built in 2008 Sash lock has 3286 stamped on the inside

Hi there, this is Jeremy. Just seeing if you have these or happen to know what they are. Thanks!

We have a beach house and the keepers are falling apart due to the salt air. I would like to replace 12 keepers and 6 sash locks. The sash lock looks like a match for your 90-300 replacement part but the keeper is a bit different dimension. The keeper used on our windows is 1.75" vs. the 1-3/16 ... (cont.)

Hello, I recently moved into a home built in 2006 with Almond colored sliding vinyl windows, one of the window latches/locks is broken, i can find no identifying labels or marks on the windows, anywhere, not on the glass or on the vinyl. These are double pane sliding windows. the pictures are of op ... (cont.)

Hello,Trying to identify this part. The bottom of the window connects into this for opening and closing. Pic2 is the broken piece, Pic1 is the other side of said window. Right now the window will not stay open due to the breakage. Hoping you guys can help.26B BS1 ELThank you..

was originally white, Number 3 on underside left of cam in picture 281 attached, width is 1" with cam unlocked, 1 3/16" cam fully extended, and 1 1/8" fully locked, screw holes are 2 1/4' on center, the cam is 3/8" thick and 3/4" wide

This matches up to your part number FACE MOUNT KEEPER & SASH LOCK, 2-1/4" Product Code: 90-300.... But I cant see the hook part of the latch. Do you have a pic of the hook / latch part? for your lock? All the dimensions match up except I cant see the how it locks.

Hello. I just moved into a house that came with a broken window lock. I cannot find any identifying names, numbers, or markings. From my measures, the screw holes are 2-1/4" apart and there is a 7/16" backset from the front of the lock to the screw holes. The keeper is recessed, so it is screwed per ... (cont.)

Cant find the part

Do you have this part? I don't have the part no. other than it's for a PGT Vinyl window