Viewing all customer Discussions for:

58-045 Gray Pile Weatherseal, 9/32" x 1/4"

need weatherstrip for aluminum commercial double doors. 'T' shape: 'FIN' is 3/8'' - PILE is 1/4 x 1/4

The whiskers are 7' long on each side and 3' across on top and bottom.

The weather stripping slides into the slot on plastic piece. Picture shows side with weather stripping top of door is with out.cant find right size. Plastic piece of weather stripping that slides into holderis either 9/32 or 5/16 I think. Fuzzy part is like 2 pieces with plastic in between. Are the ... (cont.)

Mfg & installed 2004. Do not have model no

Hello, Looking for replacement pile weather stripping for some old aluminum sliding glass doors. I haven't been able to figure out who made these doors and finding parts has been tricky. It looks like the weatherstripping is 1/4inch by 1/4inch. Thanks for any tips.

I'm looking for fin seal strips for a Cardinal (I think) sliding patio door. Bottom fin strip is 1/4" or 7mm wide, and the vertical fin is 1/4" tall. Door height is approximately 76-1/2" tall. I also would like to replace the top & bottom rubber seals on the stationary door (where the 2 doors meet ... (cont.)

I think I have pile weather stripping for a window. It measures 1/4" x 1/4" and its white in color. Do you guys sell something like this?

The patio two panel frame assembly was made by Caradco and installed in 1989. The door measurements are: 6'5 1/2" x 3' Pile 1/4"x 1/4" - puffy part weatherstripping 5/16" - hopefully the ruler helps with the other measurements. Thank you

Hi, thanks to your great site I have found what appear to be the parts necessary to repair the aging aluminum windows in my house. It was built around 1992 and has 'Empire Pacific' double paned aluminum windows. So far I have identified the balancer required as S351-21 Also what appears to be the ... (cont.)

Ther is a #271 stamped on roller

Hello, I've messaged you before regarding some of these parts, but I'm still looking and have some more info. The first pictures are a channel piece we had trouble identifying. I recently noticed that they have the number 0132 moulded inside. I found a local supplier but he was charging more than ... (cont.)

I attached 2 pics is this one the best fit? The pile is pretty beat.

Hello, I'm looking to replace my weather seals. They look like they measure at 1/4 inch wide across the base. I was thinking 3/16 would work.

This is the weather stripping I need, what I ordered was wrong.. I need enough for two doors Thank you

Base: Width 9/32 Material: Woven fabric No center fin-seal Pile Height:7/32 but very worn Pile Color Gray Which felt? 58-045 is similar, but mine does not have the fin.

Hi. I am replacing the wool pile from the aluminum windows from my 1963 home. After 6 decades, they seemed to be worn out from the harsh extreme Las Vegas heat after 6 decades. it has a metal / aluminum backing and is 1/4" wide and 1/4 inch high, but I'm thinking perhaps the height should be higher ... (cont.)

I need a weatherseal 1/4 x 1/4. Your product 58-045 is close. Does it come with self adhesive strip on the back? There is no track to fit it in but is attached to a metal frame on a glass sliding door on a boat.Matt

Need this weather stripping. 1/4 in. x 1/4 in.

I want to replace some weatherstripping on the sliding doors, do these pictures help you determine what I need? Thanks.

I'm having some trouble finding the right size weatherstripping for the gap between my double doors. I ordered your part number 58-045 but the backing strip is too wide. I measured the original strip and it is approximately .15 inches using a caliper or 3.9 mm and the length of the pile isn't cr ... (cont.)