Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

1/4" from bubble 1/2" overall length

this came off a front entry door that has side windows that pen up on ecach side . this weather stripping came off the window frame to seal window when closed the round part looks to be about 1/4 inch from the face of the round bulb part to the first bend is 1/2 inch the leg that goes into the ... (cont.)

I'm looking for replacement for weather stripping on double hung windows. The windows are wood and have a channel for pushing strip in. The strip is on the top, middle, and bottom. See pics attached.

Do you have a weatherstrip that will replace this?

I ordered your part number 58-055 which looked the closest to what I have. However the part which slides into the grove on the window is slightly smaller than the ones on my windows because it will not stay in. When you open the window the bubble seal falls our. Do you have something which would ... (cont.)

looking to replace weatherstripping

You guys helped me out before. I purchased the bubble weatherstripping and found out it only works on the sides of the casement windows. The upper and lower weatherstripping looks like the attached photo. This weatherstripping inserts into the metal channel. Thank you, David- Happy Thanksginvin ... (cont.)

Hi, I am looking for replacement weather stripping for my windows. It is white and slides into a channel on the edge of the window frame. Thanks.

Hi, I'm going to repair my windows rather than replace but want to be sure I get the correct weatherstrip /sealing materials. Is it obvioius from the make and era what I need to order? thanks... Ian

We just bought this house and do not know what make the casement windows are. Can you identify and sell me the weather-strip in the attached photo? Louis

Hello, replacing my bubble seal and it looks like I should use something like 58-053 on sides and 58-055 angled on top and bottom to avoid hinge hardware. Is it ok to use the two in combination? I noticed the diameters are a bit different between them. Is there a difference in compression stiffness ... (cont.)

From 1988 window. the L shaped plastic is 1/4" x 1/4" the bubble seal is about 1/4" I need to relace it on 12 window, each widow need 26" of weather stripping. Thanks.

I am looking for 150ft of the attached.

I thinkin the 58-055 might work for me. (Casement Windows) Instead of the V shape flap shown in my photo you have the bulb. Maybe the one without the angle seal would be better? The barb measurements are the same and the V flap, when open is 1/4" The base of the V flap attached to the barb i ... (cont.)

buld is about 5/16, part connecting buld and insert is about 7/8 inch and the insert part (with arrows, which inserts into the window) is about 1/4 inch long. The angle looks to be a 90% angle Do you have anything like this

Need to replace weatherstripping on several Kolbe & Kolbe double hung windows installed in 1985. Image #1 - I think is Part # 58-053 Image #2 - I think is Part # 58-055 Yes or No?

looking for offset filled bulb weatherseal for simonton window lower sash slot approximatley 5/32 wide. Charles

I ordered your 58-055 bubble seal with the angled base and 9/32" bubble; although the seal fit well into the casement window stop channel, I experienced some leaky windows after the seal retrofit. Perhaps the bubble diameter needs to be larger? And/or the leaf seal be replaced? Thanks. Tom ... (cont.)

Need weather seal for jeld-wen casements windows bought in 1999. I can send pic if you send me an email address.

I'm trying to locate a weatherstrip used on Malta awning windows about 30 years ago. It has both rigid and soft parts and came in strips about 5 feet long. Attached is a sketch of the cross section, showing how it slips into a groove in the wood window parts. Bill