Viewing all customer Discussions for:

58-127 Pile Weatherstripping, 3/16" x 1/4"

If I buy this with the black pile, will the backing plastic also be black? I want to use this for an application that will leave the backing exposed.

we are a RV repair facility based in Channelview, TX. I am current looking for a part. I have attached pictures. The Base is 3/16 of a inch and the sweep is 5/16 or 9/32. Which is basically your part number 58-001 but I need it in black if possible. Please feel free to call or E-mail back a ... (cont.)

I recently ordered item # 58-127 but could not get it into the tracks of the window. The base was too large. On measuring again I believe I now have a more accurate measurement of what is needed.... a 1/8 x 1/8 black weather-stripping. When I last called you requested photos of the window. All ... (cont.)

Old Peachtree patio doors need new weather strips. 3/16" X 3/16" I assume 25' / door. Worst air leaks are at the bottom of the doors. Do you have a product for that as well?

Here are some pictures of the doors that need the Amarlite weatherstrip replaced. The dimensions of the weatherstrip is 5/8" wide x 1/4" deep. Due to the lock on the doors, the top portion is 32 1/2" and the bottom portion is 45 1/2". It is 1/8" - 3/16" between the double doors. There are 2 sets of ... (cont.)

Hello, We recently bought our first home. The previous owners did not take care of their house at all. I noticed that the weatherstrip on the windows have actually ripped off the channel. I'd like go buy replacement strips but the ones I bought from Lowes are too wide for the channel (older viny ... (cont.)

I am looking for wool pile window weatherstripping. I measured it will a caliper and the plastic that SL see into the groove is .172 inches (5.94mm) and the pile height is .31 inches (9.67). I used a caliper for these measurements. I would like to have white. It has 2 rows of pile with a very thin p ... (cont.)

Good afternoon, we have several Rollyson aluminum windows (34.5" and 43.5" wide where the weather stripping in that attached images have disintegrated or just fallen off. Do you sell replacements and how are do we attach to the top of the window? Any special glue?

I need to replace the weatherstripping on my Certainteed vinyl windows. The weatherstripping is white, 1/4" high with a 3/16 base and a double fin. Your website shows the 58-127 weatherstripping. Does it have a double fin, and if not is the double fin necessary? Thanks, Jim

Although my weatherstripping (3/16 X 3/16) for my double hung replacement windows is not particularly worn, I have always had cold drafts in the winter and would like to replace. In looking head on at some of the windows, it is apparent that the windows don't fit the openings as they should ..... f ... (cont.)

Looking to replace my bottom window seals and wool pile on all my windows. They are Certainteed vinyl Windows I bought 15 years ago. Extremely drafty. Model of the window is XTDHBSH. The wool pile measures to be 3/16w X1/4h". Also has a thin vinyl strip in the middle of the pile. Do you offer ... (cont.)

I think the weatherstripping from my vinyl windows is .187 by .170 height, but since it's crushed it's hard to tell. There does appear to be a center fin, so can I replace it with a little higher pile with a center fin? Like .190 or .250?

Please advise which part number the window felt is, please. And are they all the same size on a window. A noticed some staples in a few of them. Do i need to staple them in as well? Thanks

Attached pictures are for weatherstripping for Traco windows that has gone bad. 3rd photo is the markings with in the glass. Is this product available?

My weather stripping measures: 3/16" x 1/2" White with a type of filament in between Do you have this dimension?

i am testing this as i have tried to send 4 pics in a submission to you and it just comes up an error occured

Hi, I attached pictures of two different piles in my window. IMG_1376 and 1380 are of the first sample and IMG_1382 and 1382 are of the other. I believe the first is 5/32X1/4 and the other believe is 9/32X1/4. The last picture is of the profile of each. The first one on the left and second on r ... (cont.)

Hi, I have an old Peachtree Citadel screen door, date unknown. I need two parts. 1) Wool pile: I measure it at 5/32 or 3/16 wide on the flat bottom and 9/32 or 1/4 tall to the wool pieces. Suggestions? 2) Roller: The one I need for this screen door seems to be 84-018. I'm not sure how to re ... (cont.)

I need a few of the small plastic piece indicated by arrow. Also, is there a replacement for the long fuzzy gasket-like piece (other arrow) that slides into the channel. Window was installed in 1990. Brand is Gapco. I'm replacing all balances and sash guides and noticed that some of the plastic ... (cont.)

My wife & I recently purchased a home built in 1999 with Better Built single hung tilt windows. The rubber seals/weatherstripping on most of the windows is hard/brittle and not making a good seal. The weatherstipping slides into a T-slot and looks like the T portion is 3/16" wide and the rou ... (cont.)