Viewing all customer Discussions for:

58-127 Pile Weatherstripping, 3/16" x 1/4"

Does the 58-085 weatherstrip come in any other lengths of pile? The 1/2 inch width is good, but I need about 3/4 inch length of pile.

I need weather stripping for Certainteed window model B31404 windows

Looking for white w/ 3/16" base, 5/16" height. Didn't see on your site (or anywhere else on the internet, for that matter). Hoping I just missed it on your site.

We are in need of weather stripping for our windows. The first picture shows a picture of the type we have. The bottom strip has a 3/16" wide strip of plastic that is pressed/slide into the channel for the window. The weather stripping has a thin plastic "fin" down the center, however I am not c ... (cont.)

do you have the rolls of mohair that are "slid in" the sides of the window frame to move up and down easier? dave

Looking for weatherstrip for an old Acorn DorWal series 1200. it is identified on the parts list as #540-25013 fin seal weatherstrip. It is 1/4" wide at the base and the pile height is 3/16". I need 100' any color. Thank you for any help you can provide

I need to replace some wool pile weatherstripping that is on our half-screens. It measures 3/16" x 6/16". Which product would work the best? Thanks! Julie

I just bought a house built in 1986 and it appears to have Caradco Windows in it. They are in desperate need of repair. They are the Horizontal Sliding type and the only identifying information I have found on the inside sash is the marking "PPG 629 86 - 1". I think I need several wheel ... (cont.)

Looking for felts for miller sliding patio doors. Looks like 2 different sizes one being 3/16 wide and about 3/16 high and another 3/16 wide and strong 1/4 inch high.

I have Alcoa single hung vinyl windows that the pile weather stripping at base of window has basically turned to dust. I have sent pics of the track and a piece of the weather stripping. Is it possible to replace the weather stripping removing the window? I know because of the T shaped desi ... (cont.)

Hello, it looks as if I have white pile that measures 1/4 x1/4 and does slide into a track but I can not find exact. What would be my closest to look at. photos attached. thank you.

I have included the pictures for the air seals on my double hung vinyl windows that tilt. I am looking to reduce the drafts. The base of the strip measures, .1875 (3/16") inches across. I am looking for either a high performance "hair"seal or maybe another type like an "O" ring attached to base. ... (cont.)

Can you identify this felt? It is on my storm windows. It is so fragile that I can't get a piece fully intact. Thanks Mike

Dear sir, I need part identification help. I want to replace weatherstripping on two sliding screen doors (manufactured by Alumaroll Specialty Co, Sheboygan, WI). It appears they only sell wholesale and in very large quantities. Weatherstripping is wool pile, width of base 3/16's of an inch; pi ... (cont.)

I would like to replace the white wool weatherstrips attached to my vinyl double hung windows. The appear to be 1/4'' high with a groove to fit in 2/16'' to 3/16'' wide Weatherstrip seals the top of the lower sash against the bottom of the upper sash.

My sliding windows are 45 years old and need new wool pile badly. The window has two sizes of wool pile. All of it is small except one vertical strip where the two windows touch when closed, that looks to be bigger. I pulled out a piece of the small Pile and it is 3/16 wide and 3/32 high in it ... (cont.)

i have ~10year old vinyl replacement windows. the white pile is loosing seal on some windows and id like to find a replacement. the old pile measures ~.240 width and ~.300 height. it has a fin seal. it was extremely difficult to remove, it was not glued in. it is also the original seal, as all s ... (cont.)

Yes, please see Swisco's 58-127 White Wool Pile, 3/16" x 1/4".

I need to replace the wool pile weather stripping on my vinyl windows. The existing wool pile is gray, measures 3/16" by 3/16" and has a center fin (the existing wool pile is compressed, but pile height was measured using the center fin). Do you recommend replacing with 58-002, which has no center ... (cont.)

We currently have two different wool pile products that have a 3/16" base, unfortunately neither of them have a 3/4" height. Take a look at 58-127 and 58-002. Click here to take a look through our full wool pile section.