Viewing all customer Discussions for:

58-134 Commercial Bubble Weatherstrip, 25ft

Hello, I have attached several images of T-slot bulb weatherseal currently used in an astragal. The T-portion is approx 9/32". Would you please recommend an appropriate model/item code to use in ordering? Thank you!Jeff

Looking for replacement weatherstripping, either same as original or aftermarket item if it improves on the original. Channel on the astragal is .45cm wide that the "foot" goes into. Original metal doors were manufactured by Stanley, house build in 1989. Original weatherstripping is rubber materi ... (cont.)

We are using the 58-134 for replacement gaskets. Can you provide a product code for similar gaskets that are 10% and 20% smaller? I'm hoping to find a similar gasket with the same 9/32" base but a smaller bulb. Let me know if that's possible.

Do you carry weatherstrip like this? Our house is a modular, built in 2009, the door is aluminum. The opening of the metal strip is about 1/4". I don't need the metal part, just the rubber weatherstrip. Thank you very much.

I believe the system is old kawneer but not totally sure. I was wonder if y'all could let me know what it is for sure and where to find it.

Hello, In our church model 5 years ago, we got new metal doors with windows in them. The weather stripping in the picture has worn and ripped (it is made of a rubber material, no plastic or metal parts) and it slides right into a slot on the door. I think it is weatherstripping. The width of the " ... (cont.)

We had the original dimension of the gasket fabricated by a manufacturing company see attached shop drawing and we replaced the gasket and water tested the window. Due to the windows age as well as some minor adjustments to the window and frame over the years, the original size is not making a t ... (cont.)

These come in 10' lengths would like to know if I could get just the rubber seal on a roll have the metal strips.

Is a special tool required to install #58-135 or #58-134 insulation at the bottom of a window? Does the sash need to be removed before replacing the insulation strip?

This is weatherstripping from the frame of a commercial entry door. If it doesn't look familiar I can mail you a section. Thanks. Bob

I have many Peach Tree windows that were built in 1991. I would like to replace all the weather stripping. One item is a foam seal, at the edge of the window, that slides in the side channel. The cross section measures about 1/4 x 1/4 x length of window, and is glued into a plastic channel. Do you s ... (cont.)

I have three (4'x4') aluminum basement windows that need the weather stripping replaced. I think the sides (I included 2 pics- IMG 0876/0878) and the top use the 9/16 commercial bubble weatherstrip. Please let me know what you think. The bottom uses a different type of weather strip and I can ... (cont.)

Please quote price and delivery for 250 feet or minimum order quantity. Material is the same as your p/n: 58-053. Sample is available upon Request.

We have a small project going which requires a small amount of bubble weatherstrip. The base measurement that we need is 13/32, or 7/16 can be remodeled a little. Do you have anything in bubble weatherstrip that would come to either of those measurments? Need your help

They are 9/23

Weather seals

The weatherstrip insert for the threshold of one of our interior doors has failed, and I have been unable to find a replacement. It was installed when we rebuilt our house in 2008. I​'ve attached both a jpg​ of the cross section of the weatherstrip, and a sketch showing its dimensions. If y ... (cont.)

Hello I work for a school district and the weather stripping between our 2 dock doors has gone bad. Do you guys carry any models that look like the picture I sent above. I included a picture of the tag of the door and the make, I think it's a Stanley . It is 84 inches long... The stripping that is. ... (cont.)

To Whom It May Concern, I'm looking to replace this weather stripping on a Kawneer door. The part that goes into the track is made of hard plastic. The loop is made of thin soft rubber. What can I use to replace it?

We are looking for the replacement bumper seal for the door sill. Please take a look at the attached photos. Your code 58-134 Commercial Bubble Weatherstrip is the product I'm looking for? Please check and let me know.