Viewing all customer Discussions for:

58-149 Larson Door Bottom Replacement Insert

I have a 32" black aluminum storm door (can't find a brand or model number) that is 1 5/8" thick and has a brass-finished bottom door sweep with three channels that accept black vinyl fins. The fins are 1/2" wide and look sort of like a "Y" but as you can see, the fin is smooth on one side and inde ... (cont.)

I own a Sugar Creek storm door that needs new rubber sweeps fopr the bottpm, none of the hardware or big box stores in my area carry any. Can you lead me where I can purchase?

EMCO Storm door 35" sn#0009900326 just the rubber strip

The door is by Cole Sewell. I am looking to replace the weather strip that slides between the opening I'm pointing at. Any help?

The part I need is the draft sweep at the bottom of the door used to stop cold air from entering under the door. The registration # is 04229894538 93. Door is 35.5 inches wide. Thanks

Do you have a replacement for a V-shaped Gerkin storm door sweep? 1/8" wide x 1/2" tall. Photos attached.

Hi - I struck out at Lowes and the guy there recommended you. a) What rubber sweep would you recommend for this 25 year old door? b) In looking at it, it looks like it has grooves for 2 sweeps. Is that a thing? I removed the old ratty sweep from the left most groove. Thanks so much! ... (cont.)

Thanks

I can't find the brand listed on the door. The stripping itself extends about 1/2". below the channel. The channel is about 1/8" thick. The total length of the stripping (door width) is 36". The three screws holding the channel onto the door are spaced 14" apart. I am also open to more effective wea ... (cont.)

Looking for the appropriate door sweep to replace my existing for my 35" storm door. It looks like 58-149 but I would like some reassurance before ordering.

Measured old one is 2.9 mmx12.17mmx 37.5 inches

Looking for this door sweep.

Hi, looking for part to replace bottom of door were the door sweep is. Looks like it is unit and not just the rubber. Markings on are: PPC Herculite Trempe Tempered. CAN/CGSB 12.1 m. BS 6206-198IV. 16CFR 1201. ANSI 2-97.1 1984 SGCC 1065. If measured correctly dimensions are. 1 1/2 x 35. 2'11 ... (cont.)

I am trying to locate replacement rubber seals for the bottom of an EFCO door. It appears to be similar to a windshield wiper and slides in from the end (see photo). Thank you, Matt

I have an aluminum 'Dutch" door on my camper trailer. The weather strip has a 1/8" bead along one edge and a "flap" that is 3/8" wide. It slides into a long extruded groove that runs around the perimeter of the doors. The attached photo shows the end of the gray strip laid on a tape measure so you ... (cont.)

Looking for Screen Door Bottom Slide in rubber weather strips

Please help to locate, Replacement sweep or extender one or both

Howdy Swisco,Here is a vinyl window sweep for some oddball casement windows from 1977. Could this be the time I finally stump you? The nearest thing I could find to match your inventory is the Pella sweep. What do you think?Have a great weekend.Cheers,Gregg

Hello, need to order storm door sweep for a Pela store door along with the pile weather stripping.I believe the sweep is 3/8.

Hi - the rubber sweeps in the bottom on my storm door were torn and worn and now have fallen out. Please suggest a replacement product. The door sweep is almost 32" long and needs two sweeps. Thanks.