Viewing all customer Discussions for:

58-149 Larson Door Bottom Replacement Insert

Below are picks of the 3/16" backing weatherstripping that is on the jamb of the door. If the strip was not bent over and was standing up straight on the t molding it would measure 1/4" high. You can see white marks on the weather stripping on the door jamb photo that shows where the door comes in ... (cont.)

Hi as you can see from the photo the rubber seal is short and I wanted to change the seal for one that fits without gaps or replace the whole filler strip. We live in a high rise Condominium and these doors are aluminium. Another resident ordered new replacement rollers from you which work a dream ... (cont.)

35004032

Unfortunately the door got stuck in the lock position and I had to cut the lock and lock cylinder.I only need the actual mortise locking mechanism and brass lock cylinder. I have all the other brass components in usable condition.Also I'm looking for the rubber sweep which I sent a picture of on t ... (cont.)

I have older sliding glass doors. I need to replace the weather seals but I am having issues identifying the correct parts. The one seal is a bubble type that fits into a tee slot, it seals the door along the tack, top and bottom. The nominal dimensions are, the tee slot mount on the seal is .187", ... (cont.)

Earlier in the year I bought the 40-183 mortise lockset for my storm door. It's a perfect replacement. Now I need to replace the two rubber strips that are inserted or slid into two channels along the bottom of the door. If I were to guess, the 58-149 is what I need. But I seek your help. Thanks. ... (cont.)

Good morning, I need to replace two items on my storm door. See pictures and description below. 1. Door sweep. The company is no longer in business. Cole Sewell. Two doors. Measurements are 29 inches and 35 1/4 inches.

I am looking for replacement rubber sweeps for these approximately 30 year old Pella French Storm doors in the pictures. The metal holding the sweep is approx 7/8" wide and the rubber is approx 3/8" wide, making the total installed sweep width approx 1-1/4" and a length of 27" for each door sweep. ... (cont.)

pella storm door 082604 90563 4628. dimensions 1/8" (top), 9/16 down. Trying to find out what part would fit my door.

Where can I find either a 2.5" to 2.75" width door expander (bottom) in bronze? For a Larson storm door. I special ordered this door as it is a 30" wide door. The old Larson door that was broken fit height fine but the metal expander was 2.5" wide. Or if I could find a 1" wide rubber gasket (one t ... (cont.)

Please tell me which sweep you recommend for this door...I cannot recall the manufacturer nor can I find markings on the door. I'm guessing: Larson. 2.5" sweep plate 31.5" door width

The door sweep is gold with two insert openings. It has a grove in the center for the door and two holes on one side for installation. The black sweeps have a triangular lip at an angle on one side

Storm door model 248-TL Built 3/10/1998 Registration # 024881U.111980310 Door has two sweeps

I Have a Larson storm door customer # 462410715 with a single sweep. I Need a replacement and one of the screen frames broke so I need a replacement for that. Do you carry them?

Probably due to house setting, the door sweeps do not reach the threshold on one side of the door. is there an alternative sweep that is identical other than the size is 13/16 instead of 9/16.

Hello, I have a Larson Door. Registration number: 34660031.121050210. There is a brass expander at the bottom with a rubber sweep. The rubber sweep is worn out and I need a replacement. Do you have one that I can use?

Need to replace the rubber seal on a couple of storm doors. It's got a triangle on one side at the top - 1/8" wide, and is about 9/16" wide. It looks to me like the Larsen Door Bottom Replacement Insert Product Code: 58-149 might work, depending on the measurement of the V-shape shown on your web pa ... (cont.)

Please see attachments and tell me if you have replacement rubber for my sweep. The door has no markings on it that I can see. it is probably 30 years old. I tried some of your Product Code: 58-162 and of course it is too wide to fit the sweep slot and trimming it down will not allow it to stay i ... (cont.)

re: my previous question if #58-162 will fit andersonville 3000 door. nvestigation shows the door is a LARSEN. same question applies. Again , many thanks Roy