Viewing all customer Discussions for:

59-250 .250 Foam Screen Spline, 25'

We have used the 59-250 spline in our shop for Andersen screen repairs from the metal spline to the 59-250 foam spline with new screen mesh.

I am having trouble finding a replacement for spline on my 1980 pella screen door. The gap is 3/16". The existing spline is gray and measures 3/16 x 1/4". Thanks, Cheryl

Looking for good spline choice for my old screen doors. Measured gap of spline groove is 0.2 inch. Trying to figure out what diameter foam spline is best choice for this application. I do not have the original spline from these doors.

I have a screen frame made of 1" X 5/16", and I need spline for it. The spline gap is 1/4", would you recommend .250" spline, or another size?

My house was built in 1998 and I have Anderson windows. I want rescreen the window screens and I need help choosing the correct foam spline size. I measured the screen frame face and it is 3/4". The channel that the metal spline is in is about 1/4". Do I need the .250 or the .270 spline? Thanks ... (cont.)

I'm not sure who manufactured the screens in our home. The screens all need re-screened and cleaned (as you can see by the images). All screens have knife latches on each side, and stationary pins at the top which go into holes outside the windows to keep the top of the screens in place. I ha ... (cont.)

Hello, I've attached three photos of screens from my 1974 vintage Anderson casement windows. The screen is held in place with metal spline. The width of the frames, both the same for both sizes of screens, is 0.75 inches. What size foam or plastic spline do you recommend if I am installing fiberglas ... (cont.)

What diameter foam spline do you recommend that best fits a wood framed sliding patio screen door from Anderson? 59-250, 59-270 , which one? Thank you. I look forward to hearing from you. I inverted the part number for the foam spline. It should read 59-250 etc. Do you have all the diameters s ... (cont.)

Hello, I have read your Customer Questions & Comments section regarding re-screening Anderson windows but I still have questions. I noticed in one of your responses you recommended the aluminum screen but the reason that I want to re-screen is to install the fiberglass darkening solar scree ... (cont.)

I need to rescreen aCrestline. Bow window but cannot find an exact replacement for the original stiff vinyl spline. Will your 59-250 spline work? Original spline measures .230" wide by .185" deep. The screening is fiberglass cloth. The spline channel measures .250" wide bt .220" deep. The alumi ... (cont.)

I have Anderson 200 series narrowline double hung windows with the chord in the frame installed in 1986. I have screens with the closure snaps 3 to 4 inches from the bottom of the screen. Would like to know if the 59-250 spline and the 75-019 roller is what I need for rescreening.i am hoping this ve ... (cont.)

what size spline should be used in a wooden screen door with a 1/4" groove and aluminum screen

what is correct spine to replace the 1/4 inch aluminum spline in a andersen sliding patio screen door thanks

spline has been removed giving a width of .210" depth of .235Please identify the best product for Anderson window screen and your product details?#2 Do you have a light brown colored touchup paint to suggest?Bob M thanks

Hi my name is jeff. we have anderson windows and im fixing the screens and as i take them apart they are held in by 1/4in aluminum and they are arching when they come out.i have tryed the home depot and there stock only goes to .175 and its not thick enought i just dont no how to hind the correct si ... (cont.)

Roller Tool for Andersen window screen, your offer 2 sizes, 75-008 and 75-019. Which size is correct? Also, confirming part # 59-250 is black in color? Thanks, John

I am replacing the screen mesh in some of my Anderson window screens and see where you recommend 59-250 foam spline as a replacement for the metal spline Anderson uses. Looking at the pictures the spline looks brown. What color is it? Thanks.

Will this foam core spline work as a replacement for metal spine used 0n Anderson window screens. I bought the #59-250 from your company it was a to small I am using the thicker screen for pets to rescreen my anderson windows that use the metal spline. thank you

Use SWISCO product code 59-250. This size spline is often used to replace the metal spline used in Andersen screen panels.