Viewing all customer Discussions for:

70-009 5 Pack, Screen Plunger Pin Latches, 5/32"

Please help me identify these parts for kolbe screens.

Bought our home last year and our bay window screens pop out every storm. Curious is I should replace the plungers on The sides and or add two more plungers?

I have attached two photos of window screen plungers as recommended. I was hoping you could assist. Please let me know if this sufficient to identify the parts

I have Better Bilt windows and screens (series 3740 single hung aluminum windows) which were purchased from Lowes in 2005. The push spring screws which hold the screens in place (and which can be removed in order to clean the glass on the windows) are broken and crumbling (probably due to our heat ... (cont.)

I'm looking for replacement spring cylinder units that hold in the screens on sliding and double hung windows.

Hello, Looking at item 70-009, can you tell me how long the thick part of the pin is (the 7/32" part)? I've bought some other pins and this 7/32" part was about 3/16" too long so when the pin is installed in the screen, and the pin is fully retracted it still sticks out of the screen too m ... (cont.)

I have reviewed your youtube demo of this installion. Does the hole for the pin not go through/interefere with the area where the screen and spline are located??

Can you find

Hey I'm wondering the length of the pin, excluding the tip. The width of the screen frame is 3/4", and it's unclear right now if this pin is long enough.

Plastic pin w. Screw head on top. Window screen.

Dear Customer Service, I need help in selecting the right window screen push pins for my Marvin Integrity widow screens, window screens are 10.5 yrs. old, and the push pins are breaking. I have forwarded you several pictures to help identify the correct part. My contact information: Daniel ... (cont.)

Do you have a replacement for Plunger and Spring Assembly−M060, Part No. 11900896?

the window would be at least 15 years old, since we have moved to this house for 14 years now. no record for window's brand, the outside part of pin is 0.49-0.55 in. the wideness of window screen frame is about 0.71 in. I have total of ten windows with different sizes. most appreciatively. D ... (cont.)

I need help with replacing a Kolbe & Kolbe window crank assembly. The gears are not engaging and the interior components keep coming unscrewed when trying to open or close the window.I just need the internal working mechanism as the arm and handle are fine. Thank you.

Dear Sir/Madam, As you can see in the photos, one of the vinyl balance shoes for the double-hung windows broke at the pivot pin hole. There is no brand name indicated anywhere on the windows. Could you, please, identify the part and let me know if you carry that particular part? Thanks in adva ... (cont.)

Looking for replacement plungers for the screens of my Integrity/Marvin window screens

They are spring loaded. 1.5 inches long. Need about 30 b

Each of my windows have 4 holes in them, where the plunger for the screen inserts into the window jamb. There are 2 at the top of the window and 2 on the jam - 1 on each side near the bottom of the window. Each of these 3/8" holes is supposed to have a plastic plug in them. The plunger for the sc ... (cont.)

I would like to build a new storm screen as the screen was discarded by previous owners. I can see that you have the corners and spring latches but where do I get the correct frame pieces that go with them? Thanks, Page

I'm having a hard time finding replacement parts for the top alignment fixed pins for my screen. Should they just be replaced by plunger style pins?