Viewing all customer Discussions for:

70-097 Replacement Window Screen Spring

I am looking for 12 replacement window screen springs for older window screens. There are three photos attached - they must fit in to two, 3 3/8th (ish) apart and be 1/4 inch in width. The rise is about 1/2 inch. Hopefully you have these and if so what part number should I order. Thanks. ... (cont.)

Looking for this tensioner for a window screen.

what is the length of #70-011leaf spring? trying to get close to my picture trying to match this tension spring

I could use some more of the springs that keep screens from falling down. They appear to be about 1/4 inch wide and about 3.25 inch long.

I busted a clip off a window screen and need to find a replacement part. One picture shows what the unbroken one looks like in the screen. The other picture shows the broken one about 3 1/2" long and 1/4" inch wide. Thanks, Alice

Window wont lock. One of these is missing and the one pictured seems defective.

do you have any of these?

I have a few of these springs that have slight rusting. What is the grade of the stainless steel?

I am designing a filter enclosure that will be using these leaf springs in a high humidity location and need to know what kind of coating is used on these, rather it is zinc phosphate + oil, electroplated zinc + chromate conversion coating, zinc phosphate + organic coating (usually cathodic electrod ... (cont.)

What spring do I need for this screen

Hello, Attached are all pictures of parts for the screen window. Please let us know if you do sell this.

How far does that spring stick up? I need tension springs for alum. sliding doors. They need to stick up about 5/8 - 3/4 inches.

I am trying to find 4 1/8" springs the same style as the 3" 70-097. Can you help? Thanks Ray W

Can you help me identify this part? Two springs on each screen.

Hello, I have several Patriot Series 2000 window latches which have broken over the years. I tried to find a replacement part at both Home Depot and Lowe's, but they don't seem to sell these. Could you help me find 5 of these? Attached are pictures of the working latches. Another item I am ... (cont.)

For leaf spring 70-097, the inside length is (app) 3 1/16". I need to purchase springs for 16 window screens. There are no have pull tabs on my screens. For my screens, the distance between the insert squares is 3 5/32", and the insert square dimensions are 5/32" and 3/16", close to those indica ... (cont.)

REPLACEMENT TENSION SPRING FOR WINDOW SCREEN FRAME- APPROX. 3-1/16" LONG

I am trying to find replacement springs for screen. I found your Product Code: 70-097 and it looks like the correct spring. The width is the same as the spec.220" and the end width is the same .160" with the same end shape but the screen dimentions are a bit different. They are 2.94" instead ... (cont.)

Hi, For 70-097, the stainless steel leaf springs for window screens, the installation hole is described on the web page as being 0.165inch by 0.180inch (a rectangle). Is there a tool available to make this hole in the screen frame? Or, if not, what technique would you use to make this hole (without ... (cont.)

Can you please help me?I have a screen that is approximately 28in. wide & 31 in. long. On the top left side of the screen there are two small holes about 3 inches apart & two small holes near the bottom about 3 inches apart. What kind of Tension Springs must I purchased for this screen? Thank yo ... (cont.)