Viewing all customer Discussions for:

70-195 Window Screen Pin

Please let me know if you have the above parts. Both the window tilt pin and the screen pins need replacing. Hopefully you have them in metal.

My pins are 1/8" diameter by 1" in total length (without the cap). What do you recommend?

Hello, Attached are photos of a screen pin and a bottom weatherstripping from a united window double hung window. I see a similar screen pin that may work, but there isn't an exact match for the weatherstripping. I was hoping to put in an order of several feet of stripping and a few dozen pins ... (cont.)

Hello! I'm hoping you can help me locate these parts for the windows in my house! I also have the window sticker for the casement metal bracket slide if that would help!! Thank you! Jared

Hi, I am looking for several push pins for window screens. They are about 3 cm (~1 inch) in length, pin diameter is 2mm and the cap diameter is 5mm. I have attached pictures to illustrate it with a tape measure. Do you have it and which one? Lastly, do you ship to Ontario Canada? Patrick ... (cont.)

These pins hold the screen in the frame they are plastic any help would be greatly appreciated Thanks Mike Rossman

I need 14 metal plunger pins. To replace broken plastic pins. Do I need 5/32 or 7/32. Here's my Question:How do I measure? Is it pin head I measure?Pin head is only thing that comes close to 7/32. If so, are all push/plunger pin lengths same size? Standard?Thank you for Your advice Swisco staff. I' ... (cont.)

I am looking for the attached product (picture is of broken one): Milgard Essence Window Screen Pin/Plunger. The part number might be IM6816CL. The length is 1.25" If you don't have this exact part, perhaps a substitute part that would also work with existing screens. One company actually sugges ... (cont.)

I am looking for replacement pins fo my 1850B Double Hung window screens

Hello, I have this casement and I don't know if you can tell from the photos but the plastic wheel that keeps the arm in the track under the window broke. I think I need to replace the casement itself since I'm sure there is no way to replace the plastic wheel. I would replace the opposite casement ... (cont.)

I need replacement pins for the top of my window screens (not the spring-loaded side pins). These are the ones that hold the screen in place at the top. It looks like your Window Screen Pin (Product Code: 70-195) would work. Do you agree? Thank you, Patrick

Are your 70-195 pins compatible with Intergrity screens?

Need to get replacement for the pins. Look to be about 2/16' diameter and 1' length. Some pin heads broke off, some are just jammed.

I need the white plastic pegs that go to United windows series 4200 SH/SL that holds the screen in place

I need to buy replacement plunger pins for a screen part #A-X7164. Thanks

I am looking to buy these plastic push pins that hold my screens in.

Plunger is approximately one and one eighth inch long. Cannot pull out of screen completely Please advise what to purchase Thanks PATTI

No branding on these clips or the windows. The storm windows are standard 1/8" glass with frame. The plastic slides in the clips slide into holes in the window trim.

TO whom it may concern - I am looking for these type of latches for my vinyl screens. I am not sure what the technical name is. When I put the screen in the window, these "push latches" go into the side of the vinyl window casing and hold the screen in place. I hope you can help me Thank You, Mark ... (cont.)

Replacement pin for window pin