Discussions for 75-032 : SWISCO.com

How to install your Screen Plunger Pins

I bought some screen plunger pins from you this week(see attached photo). I believe I received the incorrect black plastic snap covers. I would think that the plastic tabs would snap into place at the narrow end of the pin to keep the plunger pin from sliding out of the screen. These black plastic c ... (cont.)

Step down plunger bit

Do you have a step down plunger drill bit 1/8" to 5/32"?

Questions about your 70-009 plunger pin latch set

I am considering retro-fitting your 70-009 screen plunger pin latches on old Malta window screens on our home. The plastic latches that came with the windows have deteriorated over the years and are no longer made. Your pin latch ought to work but I have two questions before ordering. First, how th ... (cont.)

Screen Pin

I am looking for the pins that screw in at the top of the screens and can't find them. I attached a picture of the pin I took off on one of the screens as an example of what I need.

Corner Key

Hi I'm looking for screen corners for widows screen. Its what I have I will tray to send pictures with measurements.

+2

Female window frame component to screen window plunger pin

I want to drill a second window plunger pin into my screens and that seems pretty easy but that requires me to drill another hole in our window frame and I can find that piece. What is that part called and do you supply that? Thanks.

plunger pins

Can I replace my window screen knife hinges with plunger pin latches if I am making a new screen?

Can I use existing holes in screen?

Can I use the existing plunger hole in the screen or do I need to drill a new one when using 70-009?

Looking to replace screen pin

Looking to replace some old 1960 plastic window pins. The pin is 1-3/8" long and 1/8 in diameter. My concern is the screen frame holes are all 11/64 in diameter. Both inside and outside frame hole. Is their a replacement pin that you can reccomend. thanks jim

Screen latch

Do you have a screen latch available like the one pictured?

Marvin Infinity Screen Plunger Pins

I have 9 year old Infinity windows and the plunger pins are starting to fail. Hard to believe Marvin would use plastic plungers on these windows. As someone else mentioned the Marvin pins are 5/32" at plunger end and the remainder is about 0.118". The holes that are in the screen presently are 13 ... (cont.)

plunger pins and pull tabs

I need to replace my plunger pins. what is the difference between the 70-008 and the 70-009? Are there white plunger pins? do you sell white lift tabs and does one size fit all? What is the difference between the step down drill bit 75-032 and the 75-503? Price is better on the 75-503. ... (cont.)

Screen Plunger Pins

Hi, I'm not sure if there are different sized screen pins, but IMG_0604.jpg shows what i neeed installed in my screen. The frame width is 3/4" and the business end of the pin goes into the window frame slot which is 3/16" wide (IMG_0606.jpg). I prefer the metal colored pins - which part should I get ... (cont.)

The drilling part for a plunger

Do you free hand the drilling or us a jig when drilling the hole for the plunger

Step down drill bit question

Can you explain the price differential between 75-032 and 75-503? Which is most common?

Screen corners for Better Bilt windows series 6ao/6fo mfr code BB2. These are flanges screens.

Trying to find replacement screen corners for my better bilt windows. I have searched and called several companies with no luck. My frame color is sandstone. Let me know if you can help, thanks again, Dan.

5/32" window screen plunger pin

what size step down drill should use for the 5/32" plunger pin? Do you sell the drill?

STEP DOWN DRILL BIT 6" LONG 5/32" X17/64" 5/32" IS 1/2 " LONG

IM LOOKING FOR AT LEAST 3 BITS CAN U FIND THESE & WHERE I CAN ORDER THEM ITS BEEN YEARS SINCE I BOUGHT THESE THE PERSON I BOUGHT FROM IS OUT OF BUSINESS HOPE U CAN HELP

What sized plunger pin works with the 75-503 drill bit?

If I buy the step down drill bit (7/32 down to 1/8 inch), what size plunger pin would work with this? Thanks!!!

Why is the 75-032 more expensive than the 75-503?

Hi, I was wondering (other than size) what's the difference between the two step down bits & the plungers associated with each? The reason I ask is that the 75-032 is far more expensive than the 75-503. I understand there are two different sizes, but why such the price disparity? Does the 70-0 ... (cont.)

Viewing all customer Discussions for: 75-032 Step Down Plunger Drill Bit

Viewing all customer Discussions for:
75-032 Step Down Plunger Drill Bit