Viewing all customer Discussions for:

81-002 Weather Tight Door Roller

Original roller with 3 rivets needed as replacement 7/16" width rollers (M.F.S.) to not fit as the arm on one side makes it 1/2" width which is too tight

I'm maintauning a 23 unit building from the mid seventies. I'm thinking I'll have to replace quite a few of these if I can find the parts. I think all the info is in the photos but if more is required please let me know.

Need to identify and purchase two single rollers for my sliding glass door. The dimensions and diameter of the wheel is 2 3/8' L x 1 3/16' high and 9/16" Wide as shown on uploaded picture with a 1 1/8" wheel diameter. PLease advise.

The top roller is intact but the bottom assy. crumbled & the Teflon wheel(pic)appears to have an off center cam type bearing. Retainer clips are on both. Do have a set of these?

though the wheels work relatively well when I clean them and reinstall, they get stuck as soon as I put the door back on the rails b/c the wheels are not secure and therefore the height is lowered. I believe that this is due to the cavity on the bottom door frame (seen on top of the glass in the pi ... (cont.)

Hello I am looking to replace the rollers for a storm door. Do you have a part that is compatible? Thanks!

Hi,I am looking for the replacement roller for the old glass door in our condo. I removed the door and pulled out the rollers. I found the 2 labels "ALLEN STEVENS CORP WOODSIDE NY" and "6830".I really appreciate if you could help me the replacement rollers.Sincerely, Vlad

Please confirm if you'll be able to supply a replacement sliding door wheel, originally Allen Steven Corp, number imprint on wheel 5629. Attached you'll find pictures of the wheel by itself and the wheel with the door bottom panel mounting bracket. Pictures of bottom panel also attached. If needed, ... (cont.)

Hello, I'm hoping to find a replacement for the damaged part that you see in the photos uploaded. Any help would be very much appreciated... The stamp on the wheel is Kilian - Syracuse - Toronto and that's all I can decipher as it is mangled due to the size and weight of the door 60"w x 78"h Weight ... (cont.)

3/4 INCH WIDEPIN STICKING THROUGH SIDES = 7/8 LONG1 1/16 INCH TALL1.25 INCH STEEL WHEEL DIAMETERif you have questions please send an email or callThanks

Need help finding thes rollers your company manufactured. Says your company name and patten pending on other side. Appreciate whatever assistance you can give me. I need 2 but will take 4 if u have it. Thanks for your time

This roller has Allen Steven's engraved on it and is for sliding glass doors.

I see that the roller 81-013 is discontinued, what roller# is a replacement for it.

1 1/4 in depth, 3/4 " width and 2 3/4 length.

photos of the sliding door roller I am looking to replace.

Hi there. My mid-50s slider is suffering and in need of new wheels. I've searched the internet for photos of the same wheels, but no luck. The one identifying name is on the inside, but it's missing some letters so I'm not sure what the word actually is. The height adjustment on this door has to ... (cont.)

I just called. Here are the rollers> Thanks very much,> Patty

Wheel schematic and picture are attached. They are from an 8 ft wide. Al patio door that is approximately 40-50 yrs old. The existing wheels have an Al frame and 1.5 inch diameter wheels. Need help finding replacement. Nearest i found is your part no 81-002, but that has 1.25 inch diameter wheel, wi ... (cont.)

I have removed both the anchor and adjustment fasteners from the ends of the door, however the roller acts as if there is another (fastener) anchor possibly on the top of glass edge that prevents removal of the roller assembly? It also appears that the dust seal slots may also interfere with roller ... (cont.)

Looking for replacement rollers. I need 8 of these. Thanks.