Viewing all customer Discussions for:

81-004 Patio Door Roller, 1-1/2" Steel Ball Bearing

Sliding glass door rollers, need 2

Looking for sliding door rollers like attached photos

Roller for Swisco 5GD-R25 2 1/2" long, including tab 1 1/2" high, including roller sticking out 1/2" wide Doesn't match those posted on your Web site. Thanks for your help.

This old part is L-3 inches long, W-3/4, H-1 1/8. Wheel is 1 1/2 diameter. No part number. The area inside the door space. From bottom of door up to glass = H-1 1/2 inches, this is open space to the other end of the door. Inside diameter

It's the front wheel assy by the latch of the door.

Hello, Please let me know if you have the following rollers or ones that are compatible. MBC 1116 See attached Thank you, (Suggested 81-282) All the measurements are correct. The holes on the top are different but does that matter? See attached. If not, how do I go about placing an order for ... (cont.)

Width is approx 6/8 inch and the wheel appears (can't get at it well) to be 1 3/8 (outer edge) and is metal

I need four of these single wheel sliding glass rollers

I have identified the part number for a P.E. Del Mar Roller Assembly from their website that I need for replacement. It is the F3728-1.25PS ROLLER ASSEMBLY. Are you able to secure this part for me? I saw in a previous communication you had with another customer where this item was requested but n ... (cont.)

Im trying to identify a replacement for this wheel. The only markings on it are " PE DEL MAR" Please help. Thank You!

Roller pack for aluminum single glass sliding door, might be from 1979's. Do you have st stl cap for the roller to ride up on ? Also the little plastic end caps that help push dirt away from rollers Thanks

Hi. I'd like to replace these rollers. The door gets major exposure to the elements, so I'm open to suggestions, as there's a bit of rot where these rollers are found. Thanks, Mark

I need these 2 roller assembly s.

What are the part numbers for the rollers to the RayDoor aluminum patio door. Needing to order them.There are 2 rollers per door. Need to order 2 sets.

Attached are photos of parts from door. Both do not work, Will no longer adjust. There are no marking of any kind on them. Description of the parts is in the one photo with measurements.

These are wheels from my sliding glass door. I need two of them I think. Do you have these available to order?

Dear Swisco, Can you help me find these or equivalents? I need them with the 1-1/4" wheels in stainless steel. F3728-1.25PS ROLLER ASSEMBLY WITH 1 1/4? PRECISION PLUS STEEL WHEEL (Also available with 1 1/4? Precision Plus+(tm) Nylon, Stainless) Categories: Patio Door Hardware, Single Wheel Assemb ... (cont.)

I need 4 replacement rollers. The only writing omit is : production enterprises Hialeah , Florida. The wheel is 1 1/4.. the length of the piece the roller sits in is 2 1/4". The shell that goes over that is 2 5/8". The width of the part the roller sits in is 1/2 ". The width of the shell that goes ... (cont.)

Hi, We recently purchased a house built somewhere in the 70/80's - not exactly sure. The sliding doors are hard to open and I'm going to try to fix by replacing the rollers first but I have no idea who manufactured the door - can't find any markings. Any chance you can help with these photos? ... (cont.)

I need four replacement rollers for two sliding doors. single metal wheel, 1 7/16" diameter housing width is 3/4" housing height is 1 3/8" Housing is stamped with "PE DEL MAR" Can you guys help?