Viewing all customer Discussions for:

81-004 Patio Door Roller, 1-1/2" Steel Ball Bearing

Looking for replacement rollers for this 1950's era roller. Any assistance is appreciated. Thank you!

Trying to find a replcement for two rollers for my pation door. There is no visable identifacation on this part or the door.

Hi, This is an alluminum door from the 80s. I started taking it apart, but stopped short of removing the actual roller assebly, but you can see it in these photos. Single wheel. The door is 1 inch exactly and the wheel is 1-3/8 -see photo. In the "bottom rail" photo, I've lifted the side to exp ... (cont.)

We have AS NYC 7870 and need a comparable replacement. Please help.

These are 5 of 6 pictures I had taken. It appears to be an 1=1/2 inch steel rollerCan you help me identify a replacement roller please?Let me know if you need any more info or picturesThank you Christopher

doors are 30+ years 30. the rollers do not screw into the frame. how do i get them out of the door. I believe they snap in but not sure. this is the best picture i can get. i am afraid to pry them out of the frame in case i am wrong

Could not find anything matching in your parts pictures. Do you have anything that could be made to work . There are no names or numbers on the roller assembly or the door. The wheel is 1 1/2" metal. The assembly is 2 1/4" long without the tab, 1 5/8" tall and 5/16" thick

Please help me find replacement parts. Thank you!AJ

Have a sun room with 6 aluminum sliding doors that need all the wheels replaced. Looks like you may have something close.

Please see attached top, back and side photos. Unit housing width = 3/4 in. Unit housing height = 1 11/16. Wheel diameter = 1 11/16. Wheel Material is nylon. Units are attached to glass door bottom aluminum rail with drift pins. Note that the end view shows the top phillips head bolt must be the adj ... (cont.)

i have a Ray-Dor slider. It has tandem rollers on both ends with the adjustment screw on the end cap. There are two phillips screws above the adjustment screw. I can't tell if this is what keeps the rollers in, or if they are held another way. I can't see how they are attached.

I have an older glass patio door .. has a storm, screen and the main glass door.. the outside door used roller 81-004 but the inside door is way different. I was hoping it would be the same roller assembly but it's totally different.. the Adjustment screw is like a worm gear with a wedge inside beh ... (cont.)

looking to replace 10 sets of these

Need heavy duty roller

I believe these are from a mayfair sliding glass door. I'm looking for either replacement assemblies. If these are no longer available, Which wheels do I need so I can replace them in my assemblies?

Need help identifying this replacement parts. It looks like it is the following?: PatioRoller Assembly, 1-1/2" Steel Ball BearingProduct Code: 81-278

Hello,This morning I called regarding purchasing new bottom rollers for my patio door which was made in the early 1970s. Per the discussion, enclosed are pictures and dimensions of the rollers. I would really appreciate help purchasing new ones as soon as possible since I'm unable to put the door ba ... (cont.)

Width 3/4" Height without wheels is 1 1/8" Length is 3 3/8" Wheels are metal and appear to be stainless steel.

Looking for replacement. Name of door company no longer on door.

Do y'all have patio door rollers that would match these?